KPS TherCam256 Manual De Usuario página 120

CHAPTER 3 INSTALLATION INSTRUCTIONS
button [ ] is only displayed when circle, rectangle and polygon analysis objects are added (click the
auto dimming button [
Select the analysis object, and click the local dimming button, then the dimming parameter will change
with it. See Figure 3-33:
The analysis software supports the connection multiple devices (e.g., B Series, TP9 Series, C Series
and D Series), and the connection modes are as follows:
: USB connection, USB driver needs to be installed in advance, and real-time video
viewing function is not supported when the SD card is inserted;
: USB connection and WIFI connection, USB driver needs to be installed in
advance for USB connection;
: USB connection and WIFI connection, USB driver needs to be installed in advance
for USB connection;
: LAN connection and AP connection, the device IP and the IP of PC shall be at the
same network segment;
: USB connection and AP connection, network connection of PC needs to be set to
automatically get the IP address and DNS server address for USB connection;
28 USER MANUAL
] to restore the initial picture).