Instructions For Use; Location Of Main Control Components - MBM G1008/98 Instrucciones Para El Funcionamiento

3. 5.

INSTRUCTIONS FOR USE

Location of main components
The layout of the figures is purely indicative and can undergo variations.
1. Cavity pressure safety valve.
2. Cold water tap for introducing water in cooking
compartment.
3. Hot water tap for introducing
compartment.
4. Cavity water temperature control thermometer.
5. Gate valve for filling and controlling water in the cavity.
6. Gate valve draining foodstuff from cooking compartment.
7. Switch-on valve (see Knobs, keys and indicator light
modes and functions).
8. Gate valve filling water into cavity.
11. Thermostat knob (see Knobs, keys and indicator light
modes and functions).
12. Pilot light control (inside appliance).
13. Cover opening/closing handle.
14. Pipe for introducing water in cooking compartment.
15. Cooking compartment.
16. Water cavity drainage tap (inside the appliance).
Knobs, gate valves, buttons and indicator light modes and functions
The layout of the keys in the figures is purely indicative and can be subject to variations.
A
THE PRESENT MANUAL IS PROPERT Y OF THE MANUFACTURER. ANY REPRODUCTION, EVEN PARTIAL, IS PROHIBITED.
All manuals and user guides at all-guides.com
water in cooking
Burner regulation knob (GAS). It performs three different functions:
1. Igniting the pilot light and burner.
2. Adjusting the flame (minimum - maximum).
3. Turning the appliance of
Cavity water temperature control knob (GAS).
It performs two different functions:
1. Adjusting water temperature in the cavity.
2. Stops the heating of water in the cavity.
Piezoelectric button (GAS). It performs one function:
1. When pressed, it produces the spark to ignite pilot light.
Gas ignition and shut-off valve.. It performs three different functions:
1. Piezoelectric ignition: Emits gas and produces the spark to ignite pilot light.
2. Burner ignition: Emits gas into heating circuit.
3. Zero position: Stops the gas flow to the pilot light.
Hot and cold water filling knobs (GAS/ELECTRIC). Functions:
1. Open water flow.
2. Close water flow.
Water filling gate valve (GAS/ELECTRIC). Functions:
1. Open water flow inside cavity to level it.
2. Close water flow inside cavity.
Water cavity gate valve (GAS/ELECTRIC). Functions:
1. Gate valve to control and adjust the level of water in cavity.
- 8 - - 8 - 8 8
- 900-980
1
9
11
10
15
6
7
A
8
12
16
14
13
3 2
5 4