Reading Text; Reading Tables And Spreadsheets; Adjusting The Volume; Adjusting The Reading Speed - Optelec ClearReader+ Basic Manual Del Usuario

All manuals and user guides at all-guides.com
+
Optelec ClearReader Basic

Reading text

Press the Scan button to capture and start reading a document positioned beneath the camera.
After pressing the Scan button, you will hear the snapshot sound and within a few seconds the
+
ClearReader Basic will begin reading to you.

Reading tables and spreadsheets

To read tables, receipts and bank statements, press and hold the Scan button for more than 2
seconds until you hear a clicking sound. A long press of the Scan button will
enable the Table Reading mode and will disable the automatic column
recognition, making it possible to read across columns. Text will be read from
left to right ignoring column borders.

Adjusting the volume

Turn the Volume dial clockwise and release it to slightly increase the volume of
the reading voice. Alternatively, turn the dial counterclockwise and release it to
slightly decrease the volume. To rapidly adjust the volume, turn and hold the dial
to the end position. When releasing the dial it will always move back to its start
position.

Adjusting the reading speed

Turn the Speed dial clockwise and release it to slightly increase the reading
speed. Alternatively, turn the dial counterclockwise and release it to slightly
decrease the reading speed. To rapidly adjust the reading speed, turn and hold
English 28