Hanging The Fan; Installing The Receiver - Home Decorators Collection MAKENNA 52106 Guía De Uso Y Mantenimiento

Assembly - Hanging the Fan (continued)
2

Hanging the fan

Note: If the fan is too heavy to lift on a ladder, seek the
assistance of a second person to hang the fan.
□
Carefully lift the fan-motor assembly (E) up to the slide-on
mounting bracket (A).
□
Insert the ball portion of the ball/downrod assembly (B)
into the socket of the slide-on mounting bracket (A).
□
Turn the ball/downrod assembly (B) clockwise until it is
seated with the tab of the slide-on mounting bracket (A)
aligned with the slot in the ball.
3

Installing the receiver

WARNING: To reduce the risk of fire or electric shock,
remember to disconnect power. The electrical wiring
must meet all local and national electrical code
requirements. The electrical source and fan must
be 110/120 volts, 60Hz. Do not use this product in
conjunction with any variable wall control. Incorrect
wire connection can damage this receiver.
CAUTION: If other fan wires are a different color, have
this unit installed by a licensed electrician.
□
Position the house supply wires (AAA) to one side of
the slide-on mounting bracket (A); position the fan
wires to connect the correct pin connector properly.
□
Insert the narrow end of the receiver (L) (as shown,
flat side towards the ceiling) into the slide-on
mounting bracket until it rests on top of the ball/
downrod assembly.
Slot
Tab
AAA
10
L
A
A
B
C
II
D
E
L
C