Version Without Keypad (Zb); Programming; Operation; Seize (Make / Answer A Call) And Dialling - Eaton Indu Tel Instrucciones De Servicio

Version without keypad (ZB)

Operation

Seize (Make / answer a call) and dialling

Receive a call by lifting the handset. If you want to make a call, lift the handset. The private
branch exchange then automatically establishes a connection.
Optionally
If you have a telephone with a built-in programming keypad, you may program a speed code
dialling number. When the handset is lifted, this programmed number is then dialled
automatically. This operating mode is set using the programming keypad.
Programming using the device-internal 12-key programming keypad

Setting operating mode

- Lift the handset.
- Press the * key.
- Enter the operating mode code.
- Press the # key to store the selected operating mode.
- Replace the handset.
Code / Key Operating mode
1 Normal telephone, dialling by private
branch exchange
4 Automatic speed dialling

Enter speed code dialling number

- Lift the handset.
- Press the * key.
- Press the # key.
- Enter speed code dialling number
- Press the # key to store the speed code dialling number.
- Replace the handset.

Adjust ringing volume

- Lift the handset.
- Press the * key.
- Press key 5 (the ringing sound is played back with the selected volume setting).
- Set the desired volume using the keys 1 to 6.
- Press the # key to store the selected volume.
- Replace the handset.
12
(1, 4)
(speed code dialling number)
(1...6)
Comment
As-delivered condition