Adjust The Ringing Melody; Set Dialling Mode; Restore To As-Delivered Condition; Signalling Tones During Programming - Eaton Indu Tel Instrucciones De Servicio

Adjust the ringing melody

- Lift the handset.
- Press the * key.
- Press key 6 (the set melody is played back)
- Set the desired melody using the keys 1 to 9.
- Press the # key to store the selected melody.
- Replace the handset.

Set dialling mode

- Lift the handset.
- Press the * key.
- Press key 9.
- Enter the code for the desired dialling mode.
- Press the # key to store the selected dialling mode.
- Replace the handset.
Code / Key Dialling mode
1 Dual-tone multifrequency (DTMF),
unlimited tone duration
2 Dual-tone multifrequency (DTMF),
tone duration 90 ms
3 Pulse dialling (PD), 1.5:1
4 Pulse dialling (PD), 2:1

Restore to as-delivered condition

- Lift the handset.
- Press the * key.
- Press key 3.
- Press the # key to reset the as-delivered condition.
- Replace the handset.

Signalling tones during programming

Tone
Acknowledgement tone
Error tone
(1...9)
(1, 2, 3, 4)
Number
1 long tone
4 short tones
Comment
The DTMF tone is being generated as
long as the associated key is being
pressed.
As-delivered condition
Significance
Completion of a correctly performed
procedure.
An error occurred within a procedure. The
procedure is cancelled.
13