SUPAIR DELIGHT3 Manual De Instrucciones página 44

Harness User's manual | DELIGHT3
Connecting reserve risers >> harness
Attach each riser to the
shoulder attachment
points by making a Lark's
knot ( loop to loop con-
nection ). Use the largest
bridle loop ends.
Connecting reserve parachute to the risers
One maillon Rapide® 7mm and two toric flexible rings are needed
1
- Open the 7mm square
Maillon Rapide®
- Connect the bridle's loop
to the Maillon Rapide®
- Push the maillon through
the plastic ring
- Twist
2
- Push the end risers
through the toric ring
- Push the maillon through
the risers buckles
Installing the reserve parachute
- Assemble everything cor-
rectly.
- Make sure for the risers
not to be longer than one
another.
- Tighten each connection
securely.
3 4
- Give a second twist to
the plastic ring
- Push the buckle through
the maillon
5
- Tidy up the assembly
- Be certain for the riser end loops to be securely
fastened
- Close the Maillon Rapides® by hand first
- Tighten it using pliers by making a clockwise 1/4
turn
SUPAIR | DELIGHT3 | page 13