DWT K13-15 OA-AL Manual Original página 12

• It is strictly forbidden to use the appliance with
a damaged receiver� Repair and further use of the
receiver are not allowed - a damaged receiver must
be replaced�
• Prior to maintenance or repair, make sure that the
appliance is disconnected from the power source�
• After each use, it is necessary to relieve air pressure
in the receiver and drain the condensate from it�
• Do not operate the appliance with damaged or
dismantled protective devices� Never use the appliance
that is not properly equipped or was subjected to
unauthorized modifications.
• The appliance operation assumes its continuous
work without being attended by the user, so make sure
that the appliance is installed away from flammable
substances and no external factors prevent its normal
cooling (the minimum distance from any objects or
walls to the appliance is 50 cm)�
• Attention: during operation, keep in mind that the
appliance operates in an automatic on / off cycle. If
an failure occurs in the power grid and the power
supply is interrupted, the appliance automatically
turns off and also automatically turns on after the
power supply is restored.
• It is forbidden to use the appliance in places with
a dusty atmosphere, as well as with an atmosphere
containing explosive gases and vapors of aggressive
substances�
• The appliance is designed only for air compression,
do not use it for other purposes�
• Do not use the compressed air produced by the
appliance for medical or pharmaceutical purposes�
• These appliances are not suitable for filling diving
cylinders�
• Do not touch the operating appliance with wet
hands�
• The use of the appliance for various purposes
(inflation, powering pneumatic tools and appliances
using compressed air energy, coloring, washing, etc�)
assumes that the user is aware of safety rules for each
specific case.
• After the operation is finished, wait until the appliance
cools down, and only after that it can be covered or a
protective cover can be put on it�
Other hazards
• Do not use the appliance in an explosive atmosphere,
for example, in the presence of vapors of flammable
liquids or gases, particles of combustible substances
in the form of dust�
• Do not point the jet of compressed air at the surfaces
containing substances that are harmful to health (for
example, asbestos)�
• Consider the appliance weight when choosing location
for its storage and transportation (see the "Appliance
specification" table) to avoid accidents or injuries.
Appliance maintenance
• Maintenance of your appliance must be performed
by qualified personnel using the recommended spare
parts� This ensures that the safety of your appliance
will be preserved�
• Follow the recommendations for replacing acces-
sories�
Residual risks
• Even if you use the appliance in accordance with
all safety requirements, potential risks of injury and
damage still remain. Due to specific features of the
appliance design, the following hazards may occur:
• the risk of injury and material damage from
objects thrown out by compressed air;
• injuries or physical damage due to faulty
accessories or a sudden impact against hidden
objects during operation�
Following symbols are used in the operation manual,
please remember their meanings� Correct interpreta-
tion of the symbols will allow correct and safe use of
the appliance�
Symbol
English
12
Symbols used in
the manual
Meaning
Serial number sticker:
K ��� - model;
XX - date of manufacture;
XXXXXXX - serial number�
Read all safety regulations
and instructions�
Wear safety goggles�
Wear ear protectors�
Wear a dust mask�
Disconnect the power tool
from the mains before instal-
lation or adjustment�
Do not work in rain or snow�
Movement direction�
Rotation direction�
Locked�
Unlocked�