3
Operation
3.5 "P" position
The process of 1-2 seconds operation in the position "P" on the speed
adjustment button (7) is called "PULSE".
For high speed mixing with short strokes, keep the speed adjustment knob
(7) in the "P" position. When you release the button, the speed adjustment
knob (7) automatically returns to the "OFF" position and the device starts
to stop.
3.6 Recipe
In order to obtain a good chopping performance, the amount of food put
into the chamber and the size of the food should be selected appropriately.
Below is an example for carrots and similar vegetables. It can vary between
food types, it is recommended to properly place the food in the chamber.
FOOD TYPE SPEC
Carrot
(apple, pear
etc.)
3.7 Tips for blending
1. To add ice cubes to the mixes while the blender is running, dispose of
one ice cube at a time by removing the measuring cap (1). To make the
blender mix the ice properly, wait for a few seconds before adding the
next ice cube.
2. To add more food, remove the measuring cap (1) and insert the
ingredients through the hole. Make sure the food is cut to a size of 2-5
cm to fit through the hole. Put back the cap (1) when you have finished
adding ingredients.
14 / EN
Cut into
15mm*15mm*
15mmm
WEIGHT
SPEED
Carrot: 900g
High speed 30s
Water: 600g
Table Blender / User Manual
TIME