Sauder whisker Instrucciones De Montaje página 16

Step 12
Carefully stand your assembly upright.
å
Fasten the TOP (B2) to the UPPER SIDE
å
SKIRTS (G), UPPER BRACE (J), and BACK (K).
Tighten eleven TWIST-LOCK
G
Page 16
FASTENERS.
®
B2
G
K
J
How to use the SAUDER TWIST-LOCK
1. Insert the dowel end of the FASTENER into the
hole of the adjoining part.
NOTE: The dowel end of the FASTENER must
remain fully inserted in the hole of the adjoining
part while locking the FASTENER.
2. Tighten the FASTENER with a Phillips
screwdriver as tight as possible.
425616
FASTENER
®
Dowel end
whiskersupport.com