Descargar
Compartir
Imprimir esta página
Sauder Whitaker Point Serie Instrucciones De Montaje
  1. Manuales
  2. Marcas
  3. Sauder Manuales
  4. Muebles de Interior
  5. Whitaker Point Serie
  6. Instrucciones de montaje
Sauder Whitaker Point Serie Instrucciones De Montaje

Sauder Whitaker Point Serie Instrucciones De Montaje

Ocultar thumbs Ver también para Whitaker Point Serie:

Publicidad

Enlaces rápidos

Descargar este manual
CONTACT US FIRST
CONTACT US FIRST
sauder.com
sauder.com
sauder.com
BEFORE MAKING ANY RETURNS TO THE STORE.
BEFORE MAKING ANY RETURNS TO THE RETAILER.
sauder.com/service
Visit
Prefer the phone? Give us a ring at
Customer Service is available Monday-Friday - 9 a.m. to 5:30 p.m. EST (except holidays)
Lateral File
Whitaker Point Collection | Model 429374
Sauder.com
Share your journey!
to order replacement parts, view video assembly tips, or chat with a live rep.
1-800-445-1527
.
Get all organized
and stuff.
NOTE: THIS INSTRUCTION
BOOKLET CONTAINS IMPORTANT
SAFETY INFORMATION.
PLEASE READ AND KEEP FOR
FUTURE REFERENCE.
English pg 1-34
Français pg 35-39
Español pg 40-44
Lot # 573742
Purchased: __________________
10/05/21

Publicidad

loading

Manuales relacionados para Sauder Whitaker Point Serie

Resumen de contenidos para Sauder Whitaker Point Serie

  • Página 1 CONTACT US FIRST CONTACT US FIRST sauder.com sauder.com sauder.com BEFORE MAKING ANY RETURNS TO THE STORE. BEFORE MAKING ANY RETURNS TO THE RETAILER. sauder.com/service Visit to order replacement parts, view video assembly tips, or chat with a live rep. 1-800-445-1527 Prefer the phone? Give us a ring at Customer Service is available Monday-Friday - 9 a.m.
  • Página 2 Table of Contents Assembly Tools Required Part Identification No. 2 Phillips Screwdriver Hardware Identification Tip Shown Actual Size Hardware Usage Guide Assembly Steps 6-34 Hammer Not actual size Français 35-39 Español 40-44 Safety 45-46 Adjustable Wrench Warranty Page 2 www.sauder.com/service 429374...
  • Página 3 UPPER DRAWER FRONT (1) DRAWER BRACE (2) TOP (1) LEFT DRAWER SIDE (2) LOCKING DRAWER FRONT (1) BOTTOM (1) UPPER RIGHT DRAWER SIDE (1) LOWER RIGHT DRAWER SIDE (1) SMALL BACK (1) DRAWER BACK (2) BALLAST (1) 429374 www.sauder.com/service Page 3...
  • Página 4 GLIDE - 2 CAM - 26 CAM - 10 INTERLOCK DRAWER LOCK PACK - 1 CAM SCREW - 36 MECHANISM - 1 ACTUATOR - 2 LARGE WOOD SMALL WOOD PULL - 2 DOWEL - 25 DOWEL - 20 Page 4 www.sauder.com/service 429374...
  • Página 5 1-1/2" FLAT HEAD SCREW - 10 1" FLAT HEAD SCREW - 4 1/2" MACHINE SCREW - 4 BLACK 1/2" PAN HEAD SCREW - 12 3/8" PAN HEAD SCREW - 24 SILVER 1/2" PAN HEAD SCREW - 9 429374 www.sauder.com/service Page 5...
  • Página 6 The arrow in the HIDDEN CAM must point Arrow toward the hole in the edge of the board. Hidden Cam Hole Insert the CAM SCREW or CAM DOWEL into the HIDDEN CAM. Tighten the HIDDEN CAM. Page 6 www.sauder.com/service 429374...
  • Página 7 Step 1 Look for this icon. It means a video assembly tip is available at www.sauder.com/service/tips Find the numbered video or scan the QR code. å NOTE: Save some packing foam to be used later in assembly. å Assemble your unit on a carpeted floor or on the empty carton to avoid scratching your unit or the floor.
  • Página 8 BALLAST. 1" FLAT HEAD SCREW (4 used in this step) The hole is closer to this edge. The CAM SCREW is closer to this edge. Page 8 www.sauder.com/service 429374...
  • Página 9 Push the WOOD DOWELS in the edge of the LARGE BACK (F) into the edge of the SMALL BACK (E). å NOTE: The LARGE BACK (F) will slide under the BALLAST (Q). Arrow Arrow Arrow Edge with HIDDEN CAMS 429374 www.sauder.com/service Page 9...
  • Página 10 Fasten the BOTTOM (D) to the SMALL BACK (E). Tighten three HIDDEN CAMS. å NOTE: Be sure the WOOD DOWELS in the BACK insert into the BOTTOM. Arrow Arrow Arrow D E N H I D i t h f a c S u r Page 10 www.sauder.com/service 429374...
  • Página 11 Step 5 å Push three LARGE HIDDEN CAMS (7) into the LEFT END (A). å Turn seven CAM SCREWS (9) into the LEFT END (A). Arrow 429374 www.sauder.com/service Page 11...
  • Página 12 SCREW into these holes. å NOTE: The EXTENSION SLIDES will be used later for the DRAWERS. Push the black lever and pull the SLIDE from the RAIL. 3/8" PAN HEAD SCREW (6 used in this step) Open end Page 12 www.sauder.com/service 429374...
  • Página 13 Fasten the LEFT END (A) to the BOTTOM (D) and BACKS (E and F). Tighten seven HIDDEN CAMS. å NOTE: Be sure the WOOD DOWELS in the BOTTOM and BACKS insert into the END. To help line up holes, place packing foam or books here. 429374 www.sauder.com/service Page 13...
  • Página 14 Step 8 å Push three LARGE HIDDEN CAMS (7) into the RIGHT END (B). å Turn seven CAM SCREWS (9) into the RIGHT END (B). Arrow Page 14 www.sauder.com/service 429374...
  • Página 15 EXTENSION RAIL in to find the other holes that lines up with the holes in the END. Turn a SCREW into these holes. Open end 3/8" PAN HEAD SCREW (6 used in this step) 429374 www.sauder.com/service Page 15...
  • Página 16 Fasten the LARGE BRACKET (17) to the RIGHT END (B). Use two BLACK 1/2" PAN HEAD SCREWS (23). SILVER 1/2" PAN HEAD SCREW (3 used for the MECHANISM) BLACK 1/2" PAN HEAD SCREW (2 used for the BRACKET) Page 16 www.sauder.com/service 429374...
  • Página 17 BOTTOM (D) and BACKS (E and F). å Fasten the RIGHT END (B) to the BOTTOM (D) and BACKS (E and F). Tighten seven HIDDEN CAMS. å NOTE: Be sure the WOOD DOWELS in the BOTTOM and BACKS insert into the END. 429374 www.sauder.com/service Page 17...
  • Página 18 Turn nine CAM SCREWS (9) into the TOP (C). å Insert seven LARGE WOOD DOWELS (13) into the TOP (C). å Fasten the TOP (C) to the ENDS (A and B) and LARGE (9 used) BACK (F). Tighten nine HIDDEN CAMS. Page 18 www.sauder.com/service 429374...
  • Página 19 SIDE (J). Use three SILVER 1/2" PAN HEAD SCREWS (16). (4 used) Arrow 3/8" PAN HEAD SCREW (6 used for the SLIDES) The open end will overhang the DRAWER SIDE. Open end SILVER 1/2" PAN HEAD SCREW (3 used for the ACTUATOR) 429374 www.sauder.com/service Page 19...
  • Página 20 1-1/2" FLAT HEAD SCREWS (19). å NOTE: You should start each SCREW a few turns before completely tightening any of them. 1-1/2" FLAT HEAD SCREW (4 used in this step) Groove The ACTUATOR must be here. Page 20 www.sauder.com/service 429374...
  • Página 21 Fasten the DRAWER BRACE (M) to the DRAWER BACK (K). Use one 1-1/2" FLAT HEAD SCREW (19). Be sure the DRAWER BOTTOM inserts into the DRAWER BACK groove. Arrow Surface with HIDDEN CAM 1-1/2" FLAT HEAD SCREW (1 used in this step) 429374 www.sauder.com/service Page 21...
  • Página 22 Fasten one PULL (15) to the UPPER DRAWER FRONT (G). Use two 1/2" MACHINE SCREWS (21). (5 used) BLACK 1/2" PAN HEAD SCREW (4 used for the GLIDE) 1/2" MACHINE SCREW (2 used for the PULL) Page 22 www.sauder.com/service 429374...
  • Página 23 SIDES (H and J) and DRAWER BRACE (M). Tighten five HIDDEN CAMS. Be sure the DRAWER BOTTOM inserts into the DRAWER FRONT groove. For support, place packing foam or books here. The ACTUATOR must be here. 429374 www.sauder.com/service Page 23...
  • Página 24 Step 18 å Fasten the SMALL BRACKET (18) to the UPPER RIGHT DRAWER SIDE (J) exactly as shown. Use two BLACK 1/2" PAN HEAD SCREWS (23). BLACK 1/2" PAN HEAD SCREW (2 used in this step) Page 24 www.sauder.com/service 429374...
  • Página 25 SIDE (P). Use three SILVER 1/2" PAN HEAD SCREWS (16). (4 used) Arrow 3/8" PAN HEAD SCREW (6 used for the SLIDES) The open end will overhang the DRAWER SIDE. Open end SILVER 1/2" PAN HEAD SCREW (3 used for the ACTUATOR) 429374 www.sauder.com/service Page 25...
  • Página 26 1-1/2" FLAT HEAD SCREWS (19). å NOTE: You should start each SCREW a few turns before completely tightening any of them. 1-1/2" FLAT HEAD SCREW (4 used in this step) Groove The ACTUATOR must be here. Page 26 www.sauder.com/service 429374...
  • Página 27 Fasten the DRAWER BRACE (M) to the DRAWER BACK (K). Use one 1-1/2" FLAT HEAD SCREW (19). Be sure the DRAWER BOTTOM inserts into the DRAWER BACK groove. Arrow Surface with HIDDEN CAM 1-1/2" FLAT HEAD SCREW (1 used in this step) 429374 www.sauder.com/service Page 27...
  • Página 28 Fasten one PULL (15) to the LOCKING DRAWER FRONT (N). Use two 1/2" MACHINE SCREWS (21). (5 used) BLACK 1/2" PAN HEAD SCREW (4 used for the GLIDE) 1/2" MACHINE SCREW (2 used for the PULL) Page 28 www.sauder.com/service 429374...
  • Página 29 DRAWER SIDES (H and P) and DRAWER BRACE (M). Tighten five HIDDEN CAMS. Be sure the DRAWER BOTTOM inserts into the DRAWER FRONT groove. For support, place packing The ACTUATOR foam or books here. must be here. 429374 www.sauder.com/service Page 29...
  • Página 30 Step 24 å Fasten the LOCK PACK (12) to the LOCKING DRAWER FRONT (N) exactly as shown using your Adjustable Wrench to tighten the nut around the lock. Front Back Locked Unlocked Page 30 www.sauder.com/service 429374...
  • Página 31 Press one LONG FILE GLIDE (4) onto the DRAWER BACK (K). Almost time to å Press two SHORT FILE GLIDES (3) onto the celebrate! With a nap. DRAWERS SIDES (H and J). å Repeat this step for the other drawer. 429374 www.sauder.com/service Page 31...
  • Página 32 Place two FILE BARS (5) onto the FILE GLIDES (4 and 6). å Repeat this step for the other drawer. L e t t e r L e g t e r L e t t e r L e t Page 32 www.sauder.com/service 429374...
  • Página 33 Diagram 4. Push the drawer in until it is fully inserted. Pull the lower wing forward until it clicks into place. The Lower Drawer ACTUATOR must be here. Pull the upper wing forward until it clicks into place. The Upper Drawer ACTUATOR must be here. 429374 www.sauder.com/service Page 33...
  • Página 34 NOTE: Please read the back pages of the instruction booklet for important safety information. å This completes assembly. Clean with a damp cloth. Wipe dry. And to celebrate, why not share your success story at sauder.com or 35 lbs. each Page 34 www.sauder.com/service...
  • Página 35 DESCRIPTION QUANTITÉ REFERENCE DESCRIPTION QUANTITÉ conserver le livret pour future référence. Pour contacter Sauder en EXTRÉMITÉ GAUCHE ..........1 (ENSEMBLE DE GLISSIÈRE ILLUSTRÉ À PART) ce qui concerne cet GLISSIÈRE D'EXTENSION ........4 EXTRÉMITÉ DROITE ..........1 élément, faire référence COULISSE D'EXTENSION ........4 DESSUS ................1...
  • Página 36 GRAND ARRIÈRE (F). Enfoncer les CHEVILLES EN BOIS situées sur le bord dans le GRAND ARRIÈRE (F) dans le bord le PETIT ARRIÈRE (E). REMARQUE : Le GRAND ARRIÈRE (F) va glisser sous le BALLAST (Q). Page 36 www.sauder.com/service 429374...
  • Página 37 Enfoncer une PETITE EXCENTRIQUE ESCAMOTABLE (8) dans l’une ENTRETOISE DE TIROIR (M). Insérer une PETITE CHEVILLE EN BOIS (14) dans l'ARRIÈRE DE TIROIR (K). Fixer l’ENTRETOISE DE TIROIR (M) à l'ARRIÈRE DE TIROIR (K). Utiliser une VIS TÊTE PLATE 38 mm (19). 429374 www.sauder.com/service Page 37...
  • Página 38 Insérer cinq PETITES CHEVILLES EN BOIS (14) dans le DEVANT DE TIROIR VERROUILLABLE (N). Fixer le DEVANT DE TIROIR VERROUILLABLE (N) aux CÔTÉS DE TIROIR (H et P) et à l'ENTRETOISE DE TIROIR (M). Serrer cinq EXCENTRIQUES ESCAMOTABLES. Page 38 www.sauder.com/service 429374...
  • Página 39 Décoller les APPLIQUÉS de la FICHE D'APPLIQUÉS (22) et coller les sur chaque EXCENTRIQUE ESCAMOTABLE. REMARQUE : Prière de lire les informations importantes sur la sécurité figurant sur les pages arrière du manuel d’instructions. Ceci complète l'assemblage. Nettoyer avec un tissu humide. Essuyer. 429374 www.sauder.com/service Page 39...
  • Página 40 EXTREMO IZQUIERDO ..........1 BARRA DE ARCHIVADOR ........4 su referencia futura. Si necesita ponerse en EXTREMO DERECHO ..........1 CORRIMIENTO DELANTERO contacto con Sauder en DE ARCHIVADOR ............2 PANEL SUPERIOR ............1 cuanto a esta unidad, EXCÉNTRICO ESCONDIDO GRANDE ..26 FONDO .................1 refiérase al número...
  • Página 41 FONDO y los DORSOS se inserten en el EXTREMO. Empuje los PASADORES DE MADERA sujetados en el borde del DORSO GRANDE (F) en el borde del DORSO PEQUEÑO (E). NOTA: El DORSO GRANDE (F) se deslizará bajo el CONTRAPESO (Q). 429374 www.sauder.com/service Page 41...
  • Página 42 RIOSTRA DE CAJÓN (M). Inserte uno PASADOR DE MADERA PEQUEÑO (14) en el DORSO DE CAJÓN (K). Fije la RIOSTRA DE CAJÓN (M) al DORSO DE CAJÓN (K). Utilice un TORNILLO DE CABEZA PLANA de 38 mm (19). Page 42 www.sauder.com/service 429374...
  • Página 43 CABEZA REDONDA de 13 mm (16). CARA DE CAJÓN CON CERRADURA (N). Fije la CARA DE CAJÓN CON CERRADURA (N) a los LADOS DE CAJÓN (H y P) y a la RIOSTRA DE CAJÓN (M). Apriete cinco EXCÉNTRICOS ESCONDIDOS. 429374 www.sauder.com/service Page 43...
  • Página 44 EXCÉNTRICO ESCONDIDO visible. NOTA: Por favor, lea las páginas de atrás del folleto de instrucciones en cuanto a importante información de seguridad. Esto completa el ensamblaje. Limpiar con un trapo húmedo. Seque con un paño. Page 44 www.sauder.com/service 429374...
  • Página 45 Les téléviseurs peuvent être très un téléviseur. téléviseur. lourds. De plus, le poids et l’emplacement du tube image ont tendance à rendre les téléviseurs instables et enclins à tomber vers l’ a vant. 429374 www.sauder.com/service Page 45...
  • Página 46 Además, el peso y la ubicación del tubo de imagen tienden a causar la inestabilidad de televisores y hacerlos propensos a volcarse hacia adelante. Page 46 www.sauder.com/service 429374...
  • Página 47 à compter de la date d'achat la première fois et qui sont signalés à Sauder dans les limites de couverture de la contre tout défaut de matériaux ou de fabrication des composantes de mobilier Sauder.
  • Página 48 BEFORE MAKING ANY RETURNS TO THE RETAILER. So, how did it go? Dear Valued Customer: Thanks so much for choosing Sauder® furniture. I hope the Set a world record for speed? purchase and assembly process was a positive experience Feeling good about yourself? and you feel good about the furniture you just built.

Este manual también es adecuado para:

Whitaker point 429374