Sauder Whitaker Point Serie Instrucciones De Montaje
Ocultar thumbs
Ver también para Whitaker Point Serie:
- Instrucciones de montaje (56 páginas) ,
- Instrucciones de montaje (48 páginas)
Publicidad
Enlaces rápidos
CONTACT US FIRST
CONTACT US FIRST
sauder.com
sauder.com
sauder.com
BEFORE MAKING ANY RETURNS TO THE STORE.
BEFORE MAKING ANY RETURNS TO THE RETAILER.
sauder.com/service
Visit
Prefer the phone? Give us a ring at
Customer Service is available Monday-Friday - 9 a.m. to 5:30 p.m. EST (except holidays)
Executive Desk
Whitaker Point Collection | Model 429369
Sauder.com
Share your journey!
to order replacement parts, view video assembly tips, or chat with a live rep.
1-800-445-1527
.
Business or pleasure.
Works both ways.
NOTE: THIS INSTRUCTION
BOOKLET CONTAINS IMPORTANT
SAFETY INFORMATION.
PLEASE READ AND KEEP FOR
FUTURE REFERENCE.
English pg 1-50
Français pg 51-57
Español pg 58-64
Lot # 573912
Purchased: __________________
10/26/21
Publicidad
Manuales relacionados para Sauder Whitaker Point Serie
Resumen de contenidos para Sauder Whitaker Point Serie
- Página 1 CONTACT US FIRST CONTACT US FIRST sauder.com sauder.com sauder.com BEFORE MAKING ANY RETURNS TO THE STORE. BEFORE MAKING ANY RETURNS TO THE RETAILER. sauder.com/service Visit to order replacement parts, view video assembly tips, or chat with a live rep. 1-800-445-1527 Prefer the phone? Give us a ring at Customer Service is available Monday-Friday - 9 a.m.
- Página 2 CC KEYBOARD BACK (1) SMALL DRAWER FRONT (2) LARGE LEFT DRAWER SIDE (1) DD KEYBOARD SHELF (1) SMALL LEFT DRAWER SIDE (2) LARGE RIGHT DRAWER SIDE (1) EE LEFT EXTENSION BLOCK (1) FF RIGHT EXTENSION BLOCK (1) Page 2 www.sauder.com/service 429369...
- Página 3 While not all parts are labeled, some of the parts will have a label or an inked letter on the edge to help distinguish similar parts from each other. Use this part identification to help identify similar parts. 429369 www.sauder.com/service Page 3...
- Página 4 CAM - 42 CAM - 12 GROMMET HINGE - 2 GROMMET - 4 METAL PIN - 4 PULL - 5 WITH CAP- 2 KEYBOARD BUMPER CARD - 2 APPLIQUE CARD - 1 KNOB - 1 HINGE - 2 Page 4 www.sauder.com/service 429369...
- Página 5 1-1/8" FLAT HEAD SCREW - 4 SILVER 1/2" PAN HEAD SCREW - 4 BLACK 1/2" PAN HEAD SCREW - 2 28 1/2" MACHINE SCREW - 10 1/2" FLAT HEAD SCREW - 8 3/8" FLAT HEAD SCREW - 62 429369 www.sauder.com/service Page 5...
- Página 6 The arrow in the HIDDEN CAM must point Arrow toward the hole in the edge of the board. Hidden Cam Hole Insert the CAM SCREW or CAM DOWEL into the HIDDEN CAM. Tighten the HIDDEN CAM. Page 6 www.sauder.com/service 429369...
- Página 7 Step 1 Look for this icon. It means a video assembly tip is available at www.sauder.com/service/tips Find the numbered video or scan the QR code. å Assemble your unit on a carpeted floor or on the empty carton to avoid scratching your unit or the floor.
- Página 8 NOTE: The EXTENSION SLIDES will be used later for the DRAWERS. Push the black lever and pull the SLIDE from the RAIL. Use these holes. 3/8" FLAT HEAD SCREW (12 used in this step) Open end Open end Page 8 www.sauder.com/service 429369...
- Página 9 NOTE: The EXTENSION SLIDES will be used later for the DRAWERS. Push the black lever and pull the SLIDE from the RAIL. Use these holes. 3/8" FLAT HEAD SCREW (8 used in this step) Open end Open end 429369 www.sauder.com/service Page 9...
- Página 10 Step 4 å Push twelve LARGE HIDDEN CAMS (9) into one each of the BOTTOMS (F) and BACKS (H). Some assembly (and snacks) required. Arrow (12 used) Arrow Page 10 www.sauder.com/service 429369...
- Página 11 This HIDDEN CAM should f a c be closer to this edge. i t h H I D D E N D E N H I D i t h f a c S u r 429369 www.sauder.com/service Page 11...
- Página 12 END insert into the BOTTOM and BACK. S u r f a c i t h H I D D E N D E N H I D i t h f a c S u r (4 used) Page 12 www.sauder.com/service 429369...
- Página 13 Fasten the LEFT UPRIGHT (C) to the BOTTOM (F) and BACK (H). Tighten six LARGE HIDDEN CAMS. å NOTE: Be sure the LARGE WOOD DOWELS in the BOTTOM and BACK insert into the LEFT UPRIGHT. (4 used) 429369 www.sauder.com/service Page 13...
- Página 14 Push eight LARGE HIDDEN CAMS (9) into the RIGHT END (B) and RIGHT UPRIGHT (D). å Turn twelve CAM SCREWS (11) into the exact holes shown in the RIGHT END (B) and RIGHT UPRIGHT (D). Arrow (8 used) (12 used) Page 14 www.sauder.com/service 429369...
- Página 15 EXTENSION RAIL in to find the other holes that lines up with the holes in the END and UPRIGHT. Turn a SCREW into these holes. å NOTE: The EXTENSION SLIDES will be used later for the DRAWERS. Use these holes. Open end 3/8" FLAT HEAD SCREW (6 used in this step) Open end 429369 www.sauder.com/service Page 15...
- Página 16 Step 10 å Push twelve LARGE HIDDEN CAMS (9) into the remaining BOTTOM (F) and BACK (H). Arrow (12 used) Arrow Page 16 www.sauder.com/service 429369...
- Página 17 This HIDDEN CAM should f a c be closer to this edge. i t h H I D D E N D E N H I D i t h f a c S u r 429369 www.sauder.com/service Page 17...
- Página 18 UPRIGHT insert into the BOTTOM and BACK. S u r f a c i t h H I D D E N D E N H I D i t h f a c S u r (4 used) Page 18 www.sauder.com/service 429369...
- Página 19 BACK (H). Tighten six LARGE HIDDEN CAMS. å NOTE: Be sure the LARGE WOOD DOWELS in the BOTTOM and BACK insert into the RIGHT END. (4 used) BLACK 1/2" PAN HEAD SCREW (2 used in this step) 429369 www.sauder.com/service Page 19...
- Página 20 å Push two LARGE HIDDEN CAMS (9) into the MODESTY PANEL (G). 2" FLAT HEAD SCREW (4 used in this step) Arrow h o l i t h f a c (4 used) S u r Page 20 www.sauder.com/service 429369...
- Página 21 UPRIGHT insert into the RIGHT EXTENSION BLOCK. å Repeat this step for the LEFT EXTENSION BLOCK (EE) and LEFT UPRIGHT (C). (4 used) Finished edge Finished edge 1-1/8" FLAT HEAD SCREW (4 used in this step) 429369 www.sauder.com/service Page 21...
- Página 22 å NOTE: The EXTENSION SLIDES will be used later for the DRAWERS. å Repeat this step for the RIGHT EXTENSION BLOCK (FF). Use these holes. Open end 3/8" FLAT HEAD SCREW (6 used in this step) Page 22 www.sauder.com/service 429369...
- Página 23 Step 17 å Insert the GROMMETS (15) into the large holes in the UPRIGHTS (C and D) and BOTTOMS (F). 429369 www.sauder.com/service Page 23...
- Página 24 Meet Part (E). This component has been engineered to be lighter, stronger, faster… well ok. Not technically faster. But definitely makes for a sturdier executive desk that’ s easier to assemble and friendlier to the environment. Page 24 www.sauder.com/service 429369...
- Página 25 Fasten the TOP (E) to the ENDS (A and B), UPRIGHTS (C and D), MODESTY PANEL (G). Tighten eighteen LARGE HIDDEN CAMS. å NOTE: Be sure the LARGE WOOD DOWELS in the ENDS, UPRIGHTS, MODESTY PANEL, and BACKS insert into the TOP. (14 used) 429369 www.sauder.com/service Page 25...
- Página 26 å Push four SMALL HIDDEN CAMS (10) into the LARGE DRAWER SIDES (T and U). Open end Use these holes. 3/8" FLAT HEAD SCREW (6 used in this step) Arrow (4 used) Open end Open end Page 26 www.sauder.com/service 429369...
- Página 27 (4 used in this step) (4 used) I D D u t H i t h o f a c S u r D E N H I D i t h f a c S u r Groove 429369 www.sauder.com/service Page 27...
- Página 28 Fasten a PULL (17) to the LARGE DRAWER FRONT (S). n i s h Use two 1/2" MACHINE SCREWS (28). s u r f a c 1/2" MACHINE SCREW (2 used in this step) (4 used) For support, place packing foam or books here. Page 28 www.sauder.com/service 429369...
- Página 29 LARGE DRAWER FRONT (S). å NOTE: Be sure the SMALL WOOD DOWELS in the LARGE DRAWER SIDES insert into the LARGE DRAWER FRONT. (4 used) For support, place packing foam or books here. 429369 www.sauder.com/service Page 29...
- Página 30 SCREWS (30) through the holes shown in the enlarged diagram. å Push four SMALL HIDDEN CAMS (10) into the DRAWER SIDES (P and Q). Open end Use these holes. 3/8" FLAT HEAD SCREW (6 used in this step) Arrow (4 used) Open end Open end Page 30 www.sauder.com/service 429369...
- Página 31 (4 used in this step) I D D (4 used) u t H i t h o f a c S u r D E N H I D i t h f a c S u r Groove 429369 www.sauder.com/service Page 31...
- Página 32 Fasten a PULL (17) to the DRAWER FRONT (O). Use two U n fi 1/2" MACHINE SCREWS (28). n i s h s u r f a c 1/2" MACHINE SCREW (2 used in this step) (4 used) Page 32 www.sauder.com/service 429369...
- Página 33 NOTE: Be sure the SMALL DRAWER BOTTOM (N) inserts into the groove of the DRAWER FRONT (O). å NOTE: Be sure the SMALL WOOD DOWELS in the DRAWER SIDES insert into the DRAWER FRONT. (4 used) 429369 www.sauder.com/service Page 33...
- Página 34 Use six 3/8" FLAT HEAD SCREWS (30) through the holes shown in the enlarged diagram. å Push two SMALL HIDDEN CAMS (10) into the SMALL DRAWER SIDES (K and L). Open end Use these holes. 3/8" FLAT HEAD SCREW (6 used in this step) Arrow Open end Open end Page 34 www.sauder.com/service 429369...
- Página 35 (2 used in this step) I D D u t H i t h o f a c S u r D E N H I D i t h f a c S u r Groove 429369 www.sauder.com/service Page 35...
- Página 36 Fasten a PULL (17) to the SMALL DRAWER FRONT (J). U n fi Use two 1/2" MACHINE SCREWS (28). n i s h s u r f a c 1/2" MACHINE SCREW (2 used in this step) (2 used) Page 36 www.sauder.com/service 429369...
- Página 37 SMALL DRAWER FRONT (J). å NOTE: Be sure the SMALL WOOD DOWELS in the SMALL DRAWER SIDES insert into the SMALL DRAWER FRONT. å Repeat steps 28-31 for the remaining SMALL DRAWER. 429369 www.sauder.com/service Page 37...
- Página 38 Fasten the KEYBOARD SHELF (DD) to the KEYBOARD BACK (CC). Use two 1-1/2" FLAT HEAD SCREWS (23). å NOTE: Be sure the WOOD DOWELS in the KEYBOARD BACK insert into the KEYBOARD SHELF. 1-1/2" FLAT HEAD SCREW (2 used in this step) Page 38 www.sauder.com/service 429369...
- Página 39 Fasten two SHORT EXTENSION SLIDES (2) to the KEYBOARD SIDES (AA and BB). Use six 3/8" FLAT HEAD SCREWS (30) through the holes shown in the enlarged diagram. Open end Use these holes. 3/8" FLAT HEAD SCREW (6 used in this step) Open end Open end These holes must be here. 429369 www.sauder.com/service Page 39...
- Página 40 KEYBOARD BACK (CC) and KEYBOARD SHELF (DD). Use six 1-1/2" FLAT HEAD SCREWS (23). å NOTE: Be sure the WOOD DOWELS in the KEYBOARD SHELF insert into the KEYBOARD SIDES. 1-1/2" FLAT HEAD SCREW (6 used in this step) (4 used) Page 40 www.sauder.com/service 429369...
- Página 41 Step 35 å Fasten the remaining PULL (17) to the KEYBOARD FRONT (Z). Use two 1/2" MACHINE SCREWS (28). Almost time to celebrate! With a nap. 1/2" MACHINE SCREW (2 used in this step) 429369 www.sauder.com/service Page 41...
- Página 42 Peel BUMPERS from the BUMPER CARD (21) and stick them onto the KEYBOARD SIDES (AA and BB) as shown. 1/2" SILVER PAN HEAD SCREW 1/2" FLAT HEAD SCREW (4 used in this step) (4 used in this step) Page 42 www.sauder.com/service 429369...
- Página 43 FLAT HEAD SCREWS (29). å Fasten the KNOB (18) to the DOOR (Y). Use one 7/8" MACHINE SCREW (25). 1/2" FLAT HEAD SCREW (4 used for the HINGES) 7/8" MACHINE SCREW (1 used for the KNOB) 429369 www.sauder.com/service Page 43...
- Página 44 Option 2: Place the FILE HANGERS (6) onto the FILE GLIDES (5). Hang your legal or letter files on the FILE HANGERS (6) as shown. t e r L e t Option 1 L e g L e t t e r Option 2 Page 44 www.sauder.com/service 429369...
- Página 45 The drawer will push in hard until it is all the way in, then it will slide in and out easier. å Peel APPLIQUES from the APPLIQUE CARD (20) and stick them onto each visible HIDDEN CAM in the DRAWERS. 429369 www.sauder.com/service Page 45...
- Página 46 The drawer will push in hard until it is all the way in, then it will slide in and out easier. å Insert the GROMMETS WITH CAP (14) into each large hole in the TOP (E). Page 46 www.sauder.com/service 429369...
- Página 47 RIGHT END (B) and RIGHT UPRIGHT (D). Set the SHELF (X) onto the METAL PINS. å Peel APPLIQUES from the APPLIQUE CARD (20) and stick them onto each visible HIDDEN CAM and SCREW head. (4 used) Finished edge 429369 www.sauder.com/service Page 47...
- Página 48 Fasten the DOOR (Y) to the RIGHT END (B) as shown in Adjusting screw the lower diagram. Use the screws in the HINGES. You should start each SCREW a few turns before completely Hinge tightening any of them. å See the next step for DOOR adjustments. Page 48 www.sauder.com/service 429369...
- Página 49 Tighten the screws after making adjustments. å To adjust the DOOR in or out (depth), loosen the mounting screw one turn and move the DOOR in or out, as needed. Tighten the mounting screw after making adjustments. 429369 www.sauder.com/service Page 49...
- Página 50 NOTE: Please read the back pages of the instruction booklet for important safety information. å This completes assembly. Clean with a damp cloth. Wipe dry. And to celebrate, why not share your success story at sauder.com or l b s . l b s .
- Página 51 DESCRIPTION QUANTITÉ REFERENCE DESCRIPTION QUANTITÉ conserver le livret pour future référence. Pour contacter Sauder en EXTRÉMITÉ GAUCHE ..........1 (ENSEMBLE DE GLISSIÈRE ILLUSTRÉ À PART) ce qui concerne cet EXTRÉMITÉ DROITE ..........1 GLISSIÈRE D'EXTENSION COURTE ....8 élément, faire référence MONTANT GAUCHE ..........1 COULISSE D'EXTENSION COURTE ....8...
- Página 52 GLISSIÈRES D’EXTENSION LONGUES (3) comme l'indique le schéma ci-dessous supérieure. Faire attention car les pièces sont graissées. Fixer deux GLISSIÈRES D'EXTENSION LONGUES (3) à l’EXTRÉMITÉ GAUCHE (A) et au MONTANT GAUCHE (C). Utiliser huit VIS TÊTE PLATE 9,5 mm (30). Page 52 www.sauder.com/service 429369...
- Página 53 Insérer les PASSE-CÂBLES (15) dans les gros trous des BOIS du DESSOUS et ARRIÈRE dans l'EXTRÉMITÉ DROITE. MONTANTS (C et D) et des DESSOUS (F). ÉTAPE 18 Faire tourner dix-huit VIS D'EXCENTRIQUE (11) dans les trous exacts illustrés dans le DESSUS (E). 429369 www.sauder.com/service Page 53...
- Página 54 Insérer quatre PETITES EXCENTRIQUES ESCAMOTABLES (10) REMARQUE : S’ a ssurer d’insérer les PETITES CHEVILLES EN dans les CÔTÉS DE TIROIR (P et Q). BOIS dans l'ARRIÈRE DE GRAND TIROIR dans les CÔTÉS DE GRAND TIROIR. Page 54 www.sauder.com/service 429369...
- Página 55 CÔTÉS DE PETIT TIROIR (K et L). Utiliser six VIS TÊTE PLATE 9,5 mm (30) à travers les trous comme l'indique le schéma agrandi. Enfoncer deux PETITES EXCENTRIQUES ESCAMOTABLES (10) dans les CÔTÉS DE PETIT TIROIR (K et L). 429369 www.sauder.com/service Page 55...
- Página 56 CLAVIER (DD). Utiliser six VIS TÊTE PLATE 38 mm (23). 22 mm (25). REMARQUE : S’ a ssurer de bien insérer les CHEVILLES EN BOIS de la TABLETTE DE TIROIR dans les CÔTÉS DE TABLETTE DE CLAVIER. Page 56 www.sauder.com/service 429369...
- Página 57 PORTE vers l'intérieur ou vers l'extérieur. Serrer la vis de montage après avoir ajusté. ÉTAPE 44 REMARQUE : Prière de lire les informations importantes sur la sécurité figurant sur les pages arrière du manuel d’instructions. Ceci complète l'assemblage. Nettoyer avec un tissu humide. Essuyer. 429369 www.sauder.com/service Page 57...
- Página 58 Si SEPARADO) EXTREMO DERECHO ..........1 necesita ponerse en RIEL DE EXTENSIÓN CORTO ......8 PARAL IZQUIERDO .............1 contacto con Sauder en CORREDERA DE EXTENSIÓN CORTA ..8 cuanto a esta unidad, PARAL DERECHO ............1 RIEL DE EXTENSIÓN LARGO ......2 refiérase al número PANEL SUPERIOR ............1...
- Página 59 PARAL DERECHO (D). diagrama superior más abajo. Prepárese, las piezas son grasientas. Fije dos RIELES DE EXTENSIÓN LARGOS (3) al EXTREMO IZQUIERDO (A) y al PARAL IZQUIERDO (C). Utilice ocho TORNILLOS DE CABEZA PLANA de 9,5 mm (30). 429369 www.sauder.com/service Page 59...
- Página 60 Inserte los OJALES (15) en los agujeros grandes de los PARALES (C y D) y de los FONDOS (F). PASO 18 Atornille dieciocho BIELAS DE EXCÉNTRICO (11) en los agujeros correspondientes indicados del PANEL SUPERIOR (E). Page 60 www.sauder.com/service 429369...
- Página 61 Inserte cuatro EXCÉNTRICOS ESCONDIDOS PEQUEÑOS (10) NOTA: Asegúrese de que los PASADORES DE MADERA dentro de los LADOS DE CAJÓN (P y Q). PEQUEÑOS del DORSO DE CAJÓN GRANDE se inserten en los LADOS DE CAJÓN GRANDE. 429369 www.sauder.com/service Page 61...
- Página 62 CARA DE CAJÓN PEQUEÑO (J). NOTA: Asegúrese de que los PASADORES DE MADERA PEQUEÑOS de los LADOS DE CAJÓN PEQUEÑO se inserten en la CARA DE CAJÓN PEQUEÑO. Repita pasos 28-31 para el otro CAJÓN PEQUEÑO. Page 62 www.sauder.com/service 429369...
- Página 63 DE ESTANTE DE TECLADO (CC) y al ESTANTE DE TECLADO (DD). Utilice seis TORNILLOS DE CABEZA PLANA de 38 mm (23). NOTA: Asegúrese de que los PASADORES DE MADERA en el ESTANTE DE TECLADO se introduzca en los LADOS DE ESTANTE DE TECLADO. 429369 www.sauder.com/service Page 63...
- Página 64 PASO 44 NOTA: Por favor, lea las páginas de atrás del folleto de instrucciones en cuanto a importante información de seguridad. Esto completa el ensamblaje. Limpiar con un trapo húmedo. Seque con un paño. Page 64 www.sauder.com/service 429369...
- Página 65 à Les téléviseurs peuvent être particulièrement un téléviseur. cet effet. lourds. De plus, le poids et l’emplacement du tube image ont tendance à rendre les téléviseurs instables et enclins à tomber vers l’ a vant. 429369 www.sauder.com/service Page 65...
- Página 66 Además, el peso y la ubicación del tubo de imagen tienden a causar la inestabilidad de televisores y propensa a volcarse hacia adelante. Page 66 www.sauder.com/service 429369...
- Página 67 à compter de la date d'achat la première fois et qui sont signalés à Sauder dans les limites de couverture de la contre tout défaut de matériaux ou de fabrication des composantes de mobilier Sauder.
- Página 68 BEFORE MAKING ANY RETURNS TO THE RETAILER. So, how did it go? Dear Valued Customer: Thanks so much for choosing Sauder® furniture. I hope the Set a world record for speed? purchase and assembly process was a positive experience Feeling good about yourself? and you feel good about the furniture you just built.