Direct Code Set Up - One for All URC-7120 Manual De Instrucciones

All manuals and user guides at all-guides.com
Instruction manual
(see manual on our internet site)
• Mode Reassignment
• Key Magic®
• Macro

Direct Code Set Up

1
2
3 sec.
Press and hold for 3 seconds until the blue LED (any LED) stays on.
3
Select the
corresponding
< select >
device e.g. TV
4
Enter the 1st code listed for your
device type & brand (e.g. TV
Hitachi = 1576)
5
Press POWER.
Congratulations! You should now be able to switch your device back ON
and control your device successfully.
8
Find the code for your device in the Code list
(page 71 - 85). Codes are listed by device type
and brand name. The most popular code is
listed first. Make sure your device
is switched on (not on standby).
--> The blue LED will blink twice and
then switch off.
OFF
Ready
If your device does NOT switch off?
--> Please repeat steps 1 - 5 trying
the next code listed for your
brand.
If NOT successful?
--> Try the Search Method.
WWW ONEFORALL COM
x2
=