Function Keys; Turn On/Off Your Device; Turn On For The First Time; Turn Off Your Device - jp.ik LEAPT304p Manual Del Usuario

4.1 Function keys

Press on of the following keys to perform the desired function.
Puts your computer into sleep mode
Decreases the display brightness
Increases the display brightness
Switches display output between your display, external monitor
(if connected) and both
Mutes/unmutes the audio output
Decreases the volume level
Increases the volume level
Note:
If your software uses some of the function keys to perform dedicated functions,
you can perform the function by pressing "Fn" plus the desired function key.

5. TURN ON/OFF YOUR DEVICE

If this is the first time you turn this computer on,
connect the AC adapter and fully charge the battery.
Press the power button (normally 1 to 2 seconds) until
you see the power indicator light up in blue.

5.1 Turn ON for the first time

The laptop will require you to do the initial setup, which includes:
• Activate your Windows 10;
• Sign in to or create your Microsoft account;
• Setup a wireless connection and more.
Please follow the instructions to complete the initial setup.

5.2 Turn OFF your device

Before turning off your device save all your data. To turn off your device, follow
the next steps:
• Click the Windows icon in the low-left corner of the Desktop.
Or, press on the Windows key in the keyboard;
3 click here
• In the start menu click on the Power icon and select Shut
Down from the power option menu as shown in the image.
2 click here
1 click here

5.3 Sleep mode

While away from your device it is recommended to put it into sleep mode. To
put your device to sleep mode follow the below:
• Close the display panel;
• Press the power button briefly one time;
• Open the Start menu and click on Power and then Sleep.
It is recommended that you put your computer to sleep before you move it.
Especially, if your laptop comes with a traditional hard disk, instead of a modern
SSD. Moving your computer while the hard disk is spinning can sometimes
damage the hard disk, causing loss of data.

5.4 Waking up

To wake up your device do one of the following:
• Press the power button briefly one time;
• Press the windows key;
• Tap the touchpad, press any key on the keyboard or open the display panel.
7