Function Keys; Docking And Undocking; Tablet Stand - jp.ik SLIDE S301 Manual Del Usuario

4.1 Function keys

Press on of the following keys to perform the desired function.
Puts your computer into sleep mode
Decreases the display brightness
Increases the display brightness
Switches display output between your display, external monitor
(if connected) and both
Mutes/unmutes the audio output
Decreases the volume level
Increases the volume level
Note:
If your software uses some of the function keys to perform dedicated functions,
you can perform the function by pressing "Fn" plus the desired function key.

4.2 Docking and undocking

Before docking into or undocking from the keyboard:
• Make sure you have safely disconnected any USB device connected to any of the
USB ports on the system.
• Before trying to undock your system, please turn off your system and then wait
for at least 10 seconds.
In case you are having problems connecting to the keyboard, please clean the
contacts on both the keyboard and the tablet with a dry cloth.

4.3 Tablet stand

Just flip down the stand as shown on the right
to stand your tablet.
Docking into the keyboard
1. Hold your system with the bottom side
facing the docking connector.
2. Gently press and insert the system into
the docking connector.
3. When you hear a click sound, it means
the tablet is successfully docked.
Undocking from the keyboard
1. Turn off your system.
2. Set your tablet on a stable surface.
3. Hold the screen and detach the system
by pulling it upward.
7