Helpful Hints - Mr Coffee BVMC-SC500 Serie Manual Del Usuario

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

12. Press Brew button.
NOTES:
When the water
A. Drip Tray can
reaches the perfect
be removed to
brewing temperature,
accommodate larger
brewing will begin.
mugs.
B. It is normal to hear
gurgling noises inside
the unit, it is part of
how this unit operates.
C. Pump will remain on
for up to 90 seconds
to complete brewing
and dry the K-Cup
Pack.
12
BVMC-SC500 Series_16ESM1.indd 12-13
®
H ELP F U L HI N TS
Initial Cleansing Brew – Before you use your Brewer for the first time,
perform an initial cleansing brew by running clean water through the brew cycle
without using a K-Cup
®
pack or coffee grounds in the reusable filter.
One Cup at a Time – Your new Brewer makes one fresh beverage at a time.
Water Reservoir – Your new Brewer holds up 24 oz of water. This will make
appropriately 4 cups of coffee (6-oz. each) or 2 cups of coffee (10-oz. each).
The Right Water Makes a Difference – For the best tasting gourmet coffee,
tea or hot cocoa, we recommend using bottled or filtered water. We do not recommend
using distilled or reverse osmosis water. Water quality varies from place to place. If you
notice an undesirable taste in your cup of coffee such as chlorine or other mineral taste, we
recommend you consider using bottled water or water from a filtration system.
Replace K-Cup
Pack Between Brews – It is necessary to replace your
®
K-Cup
pack before starting your next brew. This will reset the Brewer to allow you
®
to brew another cup of coffee.
Customize Your Flavor & Brew – With 2 ways to brew you can choose your
favorite ground coffee or over 500 varieties of K-Cup
you endless options to customize the flavor and strength that's perfect for you. For
a strong, intense cup, select an Extra Bold K-Cup
ground coffee than regular varieties). Fill the Water Reservoir with filtered or bottled
water up to the Max FILL LEVEL indicator and brew normally.
Brewing Into a Tall Mug – To brew into a tall mug, simply remove the Drip
Tray Assembly and place the tall mug on the Drip Tray Base.
The Drip Tray – Any liquid overflow (from your cup) will be caught in the Drip
Tray. Be sure to empty the Drip Tray. The Drip Tray has a snug fit to ensure it stays
put in transit.
Clean Your Brewer Regularly – To keep your Brewer looking and
performing its best, be sure to clean the external and internal components on a
regular basis. See De-Scaling in page 16 for more information.
Packs, your Brewer gives
®
®
Pack (with up to 30% more
13
5/5/16 10:44

Publicidad

Tabla de contenido
loading

Tabla de contenido