g. Select the Wi-Fi network.
h. Enter
the
password and click on "OK".
● Once the network configuration is over, the app notifies the
end of the operation on the screen.
● Due to the different network conditions, the device status
could still appear as "offline" after configuration.
In this case, update the list of the devices registered on the
app and make sure they are "online".
Alternatively, disconnect and reconnect the air conditioner
power cord.
After a few minutes, the air conditioner will appear as "on-
line".
EN - 8
Wi-Fi
network
i. If configuration has been
successful, the appliance is
displayed in the list.