Beem 02938 Manual De Instrucciones página 26

EN
Preparation
PLEASE NOTE!
• In the interest of your own safety, inspect the device and the connecting cable for da-
mage each time before you use it. Use the device only if it is in working order.
• Do not operate the device without water or with less water than is required to reach
the 2 Cups mark. If this does happen, the device switches off automatically. In this case,
allow the device to cool down before water is poured in and the device is used again.
• Never use the device without a suitable jug below the coffee outlet.
Making Coffee with Coffee Beans
1. Prepare the coffee machine, pour in coffee beans, pour in water and insert a fi lter (see the
"Handling and Operation" chapter).
2. Set the desired number of cups with the button
tion" chapter – "Setting the Number of Cups").
3. Press the button
operating lamp fl ashes. Freshly ground coffee is transported through the grinder shaft into
the fi lter and then hot water is poured over it to brew it.
If the brewing process is to be aborted prematurely, press the
lamp goes out and the device is switched off.
At the end of the brewing process, three beeps will be heard and the device automatically switch-
es on the hotplate (see the "Handling and Operation" chapter – "Keep-Warm Function").
Making Coffee with Coffee Powder
1. Prepare the coffee machine, pour in coffee powder, pour in water and insert a fi lter (see
the "Handling and Operation" chapter).
2. Set the desired number of cups with the button
tion" chapter – "Setting the Number of Cups").
3. Press the button (25). The
is not opened when the brewing process starts.
4. Press the button (19) to start the brewing process. The operating lamp fl ashes. Hot water
is poured over the coffee to brew it.
If the brewing process is to be aborted prematurely, press the
lamp goes out and the device is switched off.
At the end of the brewing process, three beeps will be heard and the device automatically switches
on the hotplate (see the "Handling and Operation" chapter – "Keep-Warm Function").
(19) to switch on the grinder and start the brewing process. The
symbol (15) appears on the display. The grinder shaft
(26) (see the "Handling and Opera-
button. The operating
(26) (see the "Handling and Opera-
button. The operating
26