Descargar Imprimir esta página

WERKU WK403270 Instrucciones Originales página 2

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 7
ENG ORIGINAL INSTRUCTIONS
CE DECLARATION CONFORMITY.
Werku
®
declares that the WK403270 sander is
in accordance with the European Directives and
Standards:
2006/42/CE
2006/95/CE
2004/108/CE
EN55014-1:2017
EN55014-2:2015
EN61000-3-2:2014
EN61000-3-3:2013
EN62841-1:2015+AC:15
EN62841-2-4:2014
La Coruña, 01/09/2021
R Yáñez
Werku Tools SA
TECHNICAL CHARACTERISTICS.
Voltage-frequency .............................. 230V~50Hz
Power .......................................................... 350W
Class .................................................................. II
Protection index ........................................... IP20
Speed rate .................................. 6000-11000 min
Speeds ............................................................... 7
Base sizes
........................................
Sandpaper sizes ............................... 280x115 mm
Orbit diameter .............................................. 2 mm
Net weight .................................................. 2.3 kg
Acoustic pressure LpA ......................... 78 dB(A)
Respective uncertainity KpA .................... 3 dB(A)
Acoustic pressure LwA ........................ 89 dB(A)
Respective uncertainity KwA .................... 3 dB(A)
Vibration Ah .........................................
Respective uncertainity Kh ..................... 1.5 m/s²
VIBRATION.
The declared vibration total value has been
measured in accordance with a standard test method
and may be used for comparing one power tool with
another. The declared vibration total value may also
be used in a preliminary assessment of exposure.
Warning: vibration emission during actual use of the
power tool can differ from the declared total value
depending on the ways in which the power tool is
used. Warning: identify safety measures to protect
the operator, based on an estimation of exposure in
the actual conditions of use.
PICTOGRAMS.
SAFETY INSTRUCTIONS.
This power tool is intended to function as a sander.
Read all safety warnings, instructions, illustrations
and specifications provided with this power tool.
-1
Failure to follow all instructions listed below may
result in electric shock, fire and/or serious injury.
230x115 mm
Keep all warnings and all instructions for future
reference. Accidents can be avoided in many cases
by recognizing a potentially hazardous situation
before it occurs and by observing appropriate
safety procedures. Operations for which this
power tool was not designed may create a hazard
and cause personal injury.
5.4 m/s²
WORK AREA SAFETY.
Keep work area clean and well lit. Cluttered and
dark areas invite accidents. Do not operate this
power tool near flammable materials. Sparks
could ignite these materials. Keep away from
children and curious while operating a power
tool. Distractions can cause you to lose control.
Keep bystanders a safe distance away from work
area. Anyone entering the work area must wear
personal protective equipment. Fragments of work
piece or of a broken accessory may fly away and
cause injury beyond immediate area of operation.
2
English
Wear eye protection
Wear mouth and nose protection
Wear ear protection
Read instruction manual
Double insulation
European conformity
BUREAU VERITAS - GS certification
RAEE directive

Publicidad

loading