STEINEL RS 200 SC/C Manual De Instrucciones página 40

Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 147
5. Installation
Hazard from electrical power.
Touching live parts can result in electrical shock, burns or
death.
• Switch OFF power and interrupt power supply.
• Using a voltage tester, check to make sure that the
power supply is disconnected.
• Make sure power supply remains interrupted.
Risk of damage to property!
Mixing up connection leads may produce a short circuit.
• Identify connection leads.
• Connect the leads correctly.
Preparing for installation
• Check all components for damage. Do not use the
product if it is damaged.
• Select an appropriate site to install the product.
– Take reach into consideration.
– Take reach and motion detection into consideration.
– Vibration-free.
– No obstacles in detection zone.
– Not in explosive atmospheres.
– Not on normally flammable surfaces.
– Do not look into the light source from a short dis-
tance (< 30 cm).
– Spaced at a distance of at least 50 cm from other
LED lights.
– 10 –
Index

Publicidad

Tabla de contenido
loading

Tabla de contenido