STEINEL RS 200 SC/C Manual De Instrucciones página 52

Twilight setting
The response threshold (twilight) can be infinitely varied
from approx. 2 to 2,000 lux.
= daylight mode (depending on ambient light level)
= night-time operation (approx. 2 lux)
The control dial must be turned to
the detection zone and performing the functional test in
daylight.
Basic light level
The brightness of the basic light level setting can be varied
between 1% and 50%.
The period for which the basic light level stays ON for can
be infinitely varied between 10 minutes and 30 minutes, or
set to remain ON all night.
Main light level
The brightness of the main light level setting can be varied
between 50% and 100%.
Grouping
The unit can be operated as a separate light or several
lights can be interconnected in groups via wireless com-
munication. All lights belonging to a group operate in line
with the group parameters set in the Steinel Connect app.
Reach can be set individually for all lights in the lighting
group.
Fade time
Fade Time can be used to set the rate of dimming on
switching the light ON and OFF (1 s - 3 s).
when adjusting
– 22 –
Index