Surewerx Jackson Safety 47100 Manual De Instrucciones página 4

4. Battery indicator
We suggest replacing the battery when it is low. Otherwise, the ADF switching time will
become slower and shade accuracy may be compromised.
True Color
The auto-darkening helmet is a True Color welding helmet. With advanced True Color technology,
the users can weld with improved clarity due to new complex coating and finally see the job
performance in the light state in the full spectrum of colors. There is no need to remove the helmet
to see clearly! Results are enhanced the weld quality, increased efficiency and improved safety
because the users can see more.
Maintenance
The auto-darkening helmet needs little maintenance. Use a clean, soft piece of cloth moistened
with soft soap / pure alcohol / commercial disinfectant to wipe the inside and the outside of the
helmet. Dry storage.
Note: Do not immerse the helmet or ADF in water directly.
Troubleshooting
Trouble
The ADF does not darken when welding.
The ADF stays dark after welding or there
is no arc present.
The ADF switching during the welding.
Inconsistent shade number in the corner
of ADF.
Warranty
The auto-darkening helmets are warranted for two years from the date of purchase. The duration
of use depends on various factors such as use, cleaning storage, and maintenance. Frequent
inspections and replacement in case of damage are recommended.
4
Remedy
Stop welding or cutting immediately.
• Make sure the sensors are facing the
arc and no obstructions.
• Replace the battery if necessary.
• If the welding place is extremely bright,
it is recommended to reduce the
surrounding light level.
• Make sure the sensors are facing the
arc and no obstructions.
• It is a natural feature and will not be
dangerous for the eyes.
• In order to get a maximum comfort, try
to keep a view angle at around 90°.