Cleaning And Maintenance Of The Oven's Front Door Glass; Changing The Oven Lamp - Orima OR-954-X Manual De Instrucciones

CLEANING AND MAINTENANCE OF THE OVEN'S FRONT DOOR GLASS

Remove the proile by pressing the plastic latches on both left and right
sides as shown in Figure 18 and pulling the proile towards yourself as
shown in Figure 19 Then remove the inner-glass as shown in Figure 20
If required, middle glass can be removed in the same way. After cleaning
and maintenance are done, remount the glasses and the proile in reverse
order.Make sure the proile is properly seated in its place.
Figure 18

CHANGING THE OVEN LAMP

In order to avoid the possibility of an electric shock, ensure that the
circuit of the appliance is open before changing the lamp.
(The open-circuit is an electrical circuit that does not conduct current)
1. First of all, cut the electrical connection of the appliance and ensure
that the appliance is cooled down.
2. Remove the glass protection by turning as
shown in the igure. If you have dificulty in
turning it, the use of plastic gloves will help you.
3. Afterwards, remove the lamp by
turning and install the new lamp with the same
speciications. The speciications of the lamp
should be as follows:
- 230 V, AC
- 15 W
- Type E14
4. Place the glass protection and complete
the replacing process by plugging in the electric
cable of the appliance. Now, you can use your
oven.
All manuals and user guides at all-guides.com
GB
Figure 19
49
Figure 20
Figure 21
Figure 22