Setting The Sleep Timer; Maintaining Your Speaker System - Altec Lansing M302 Guia Del Usuario

Setting the Sleep Timer

Your Altec Lansing speaker system is equipped with a sleep timer that
automatically turns off the unit 30, 60, 90 or 120 minutes after it has been
set.
How to Set the Sleep Timer
1
ensure your speaker system is powered on.
If the system isn't on, press the STANDBY button on the speaker
system or the button on the wireless remote.
2
Press the SLeeP button.
This puts you in the Sleep Timer mode.
3
Select the sleep duration.
Press the SLEEP button to cycle through the available sleep duration
times: 0, 30, 60, 90 and 120 minutes. Selecting 0 minutes is the
equivalent of turning the sleep function off.
4
exit the Sleep Timer mode.
The speaker system will automatically exit the Sleep Timer mode after
5 seconds of inactivity. Or, press the ENTER button on the wireless
remote to exit the Sleep Timer mode.
All manuals and user guides at all-guides.com
Place your speaker system on a level surface away from sources of direct
sunlight or excessive heat.
Protect your furniture with a cloth or other protective material when placing
your speaker system on a natural wood or lacquered finish.
Clean your speaker system with a soft cloth moistened only with mild soap
and water. Stronger cleaning agents, such as benzene, thinner or similar
materials, can damage the surface of the unit.

Maintaining Your Speaker System

17