Important; Children Safety; Keypad Lock - DeLonghi 279798 Manual De Instrucciones

If the appliance detects an open window, all the
operating modes and the "Overdrive (2h)" func-
tion can be selected, however will not be active
until detected as the window is closed. The "Chil-
dren Safety", "LED Disable" and "Keypad Lock"
functions remain active and can be activated or
deactivated even when the appliance detects an
open window.
If the "LED Disable" function is active and the ap-
pliance detects that a window is opened or closed,
the LEDs come on for 15 seconds to signal detec-
tion.
4.5.2 OVERDRIVE (2h)
The "Overdrive (2h)" can be used to heat the room quickly.
Press the "2h" button to start the "Overdrive
(2h)".
The function cannot be activated when the
appliance is in "Standby".
The temperature set point disappears from the display of
the remote control. The upper LED on the appliance turns
The appliance heats at the maximum power for 2 hours, in-
dependently from the temperature setting.
To deactivate the "Overdrive (2h)" function at any time, press
the "2h" button again, the "Mode" button or the "Standby"
button.
After 2 hours since activation, the "Overdrive (2h)" exits
automatically and the appliance returns into the previously
selected operating mode.

4.5.3 CHILDREN SAFETY

When the "Children Safety" function is activated, the sur-
face temperature of the appliance is lower than in normal
operation in the active mode ("Comfort", "Night/Eco",...) to
avoid the risk of burns caused by brief accidental contact.
To activate the function, press the "+" and "-"
buttons together and hold them both down
until the icon
To deactivate the function, repeat the same
operation.
"Children Safety" can be activated in all operating modes,
including "Overdrive (2h)". The function cannot be activated
when the appliance is in "Standby".
appears on the display.

IMPORTANT:

When this function is active, the appliance heats at reduced
power and therefore the room takes longer to warm up.
Even when this function active, children should
still be supervised to make sure they are not in
danger.
Always avoid prolonged contact between the
appliance and the body.
If the appliance is already operating or is still hot
after recent use and "Children Safety" is activated,
it takes at least two hours for the temperature to
drop to the lower value and the function to be
operational.
4.5.4 LED DISABLE
If the radiator is placed in a bedroom or in another place
where the light from the LEDS may be annoying, it is possible
to activate the "LED Disable" function. If this function is ac-
tive, the LEDS turn automatically off 15 seconds after the last
received command.
To activate the function, press the " " and "+"
buttons together and hold them down until
"LEd OFF" is displayed.
To disable the function, repeat the operation. "LEd On" is
displayed.
IMPORTANT:
The "LED Disable" function is not active when the
appliance is in "Standby" mode.

4.5.5 KEYPAD LOCK

It is possible to lock the remote control keypad to avoid ac-
To activate the function, press the "Mode" and
"+" buttons together and hold them both down
until the icon
To unlock the keypad, press the same two buttons together
as before.
The "Keypad Lock" icon will no longer appear on the LCD.
21
appears on the display.
GB