Safety; Transportation And Handling - Calpeda IDROMAT Serie Instrucciones De Uso

3.2. Construction
Inlet R1" male (R1" ¼ male for IDROMAT 6)
Outlet R1" male (R1" ¼ male for IDROMAT 6)
Special non return valve to prevent water hammering
Dry-running protection
EN
Pressure gauge (IDROMAT 5-30 and 6. Not supplied)
Manual start switch (RESET
Voltage LED (POWER
Pump-running LED (ON
Security system LED (FAILURE

4. SAFETY

4.1. General provisions
Before using the product it is necessary to
know all the safety indications.
Carefully read all technical, operating instructions and
the indications defined in this manual for the different
steps: from transportation to disposal.
The specialised technicians must carefully comply
with all applicable standards and laws, including local
regulations of the country where the device is sold.
The device has been built in conformity with the current
safety laws.
The improper use could damage people, animals and
objects.
The manufacturer declines any liability in the event of
damage due to improper use or use under conditions
other than those indicated on the name-plate and in
these instructions.
Follow the routine maintenance schedules
and the promptly replace damaged parts,
this will allows the device to work in the best
conditions. Use only original spare parts
provided from Calpeda S.p.A. or from an
authorised distributor.
Do not remove or change the labels placed on
the device. Do not start the device in caseof
defects or damaged parts.
The device must never be opened, tampered
nor stripped of its protections.
The appliance must be installed, adjusted and
maintained by qualified personnel who understand the
risks involved.
Maintenance operations, requiring full or partial
disassembly of the device, must be done only
after disconnection from the supply.
All the power terminals and other terminals must be
inaccessible after installation is completed.
The connections of the alarms can distribute power
even when the the appliance is turned off.
Ensure that there is no residual voltage on the terminals
of the alarms.
Page 10 / 52
)
)
)
)
4.2. Safety devices
The device has an external case that prevents any
contact with internal parts and the elements in voltage.
4.3. Residual risks
The appliance, designed for use, when used in-line with
the design and safety rules, does not have any residual
risk.
4.4. Individual protection devices
During installation, starting and maintenance it is
suggested to the authorised operators to consider
the use of individual protection devices suitable for
described activities.

5. TRANSPORTATION AND HANDLING

The product is packed to maintain the content intact.
During transportation avoid to stack excessive weights.
Ensure that during the transportation the box cannot
move.
It is not necessary to use any special vehicle to
transport the packaged device.
5.1. Handling
Handle with care, the packages must not receive
impacts.
Avoid to impact onto the package materials that could
damage the device.
The manufacturer disclaims any liability for use
under conditions other than those indicated in these
instructions.
5.2. Storing
The appliance should be stored in a dry place, protected
from shock and possibly with its original packaging.
The storage environment temperature must be from
-10°C up to +65°C.
ISTR_IDROMAT_Rev02 - Operating Instructions