Renson LAPURE Manual De Usuario página 79

Electrical
∫ Disconnect the covering from the po-
wer supply during inspection or main-
tenance.
∫ Frequent successive operation can
cause the motor to overheat. The in-
ternal thermal safety will temporarily
render the system inoperable (about 10
minutes).
∫ Do NOT let children play with the con-
trols.
∫ Changes to the electrical part can only
be made after approval of the manu-
facturer.
Wind class
According to the quality of the product, the Lapure is conformable to wind class 6.
For your information, here are the wind classes according to DIN 13561:2015.
Warranty valid up to 100 km/h when sun protection fabric is fully rolled out.
Wind class Wind force (according to the Beaufort scale)
Class 0 Product not tested or non-compliant
Class 1 4 bft
Class 2 5 bft
Class 3 6 bft
Class 4 7 bft
Class 5 8 bft
Class 6 9 bft
10 bft
11 bft
12 bft
Electrical specifications
SCREEN ROOF
Supply voltage
Current intensity
Power
Protection class
Maximum runtime during continuous use
VERTICAL FIXSCREEN
Supply voltage
Current intensity
Power
Protection class
Maximum runtime
LED LIGHTING (in the optional crossbeam)
Warm white
Pure white
Wind speed
20 - 28 km/h
29 - 38 km/h
39 - 49 km/h
50 - 61 km/h
62 - 74 km/h
75 - 88 km/h
89 - 102 km/h
103 - 117 km/h
> 117 km/h
Value
230 Volts AC
1,5 Amps
320 Watt
IP 44
Approx. 3 - 4 minutes
230 Volts AC, 50 Hz
0,8 – 1,2 Amps (according to motor type)
170 to 270 Watts (according to motor type)
IP 44
Approx. 3 - 5 minutes
550 - 680 lm/m (120 LEDs/m)
550 - 680 lm/m (120 LEDs/m)
EN
79