Renson LAPURE Manual De Usuario página 87

Returning to the Fixscreen
default settings
A. Switch on the power 230V.
B. Switch off the power 230V for 2 sec.
C. Switch on the power 230V for 8 sec.
D. Switch off the power 230V for 2 sec.
E. Switch on the power 230V. If the Fix-
screen is in a position between the
end points, it moves in the opposite
direction from the last movement for
about 3 seconds. If the Fixscreen is at
an end point it makes a short up- and
ON
downward movement.
F. Press for more than 7 sec. on the
2 sec. 8 sec.
PROG button on the rear of the TELIS
remote until the Fixscreen makes two
short upward and downward move-
ments.
OFF
Operation of the LED
lighting
A. On the desired LED-channel, briefly
press on the ON button of the remote
control. The LED will light up (100%).
B. Briefly press on the OFF button to
switch off the LED lighting.
C. Continue pressing on the ON button
on the remote control until the LED
lights up to the desired intensity.
D. Continue pressing on the OFF button
on the remote control to reduce the
intensity of the LED.
®
A
ON
ON
2 sec.
OFF
0,5 sec
0,5 sec
A
C
B
ON
2 sec.
OFF
E
> 7 sec.
0,5 sec ON ON
0,5 sec ON ON
LED LED
LED LED
0% - 100% 0% - 100%
0% - 100% 0% - 100%
LED LED
LED LED
C D
ON
8 sec. 2 sec.
2 sec.
OFF
OFF
F
> 7 sec.
0,5 sec OFF 0,5 sec OFF
0,5 sec OFF 0,5 sec OFF
LED LED
B
LED LED
100% - 0% 100% - 0%
100% - 0% 100% - 0%
D
LED LED
LED LED
ON
ON
8 sec. 2
EN
87