Other Functions; Using The Aux Source; Selecting Aux As The Source; Setting The Aux Title - Pioneer DEH-P5630MP Manual De Instrucciones

Section
11

Other Functions

Using the AUX source

An IP-BUS-RCA Interconnector such as the
CD-RB20/CD-RB10 (sold separately) lets you
connect this unit to auxiliary equipment fea-
turing RCA output. For more details, refer to
the IP-BUS-RCA Interconnector owners man-
ual.

Selecting AUX as the source

% Press SOURCE to select AUX as the
source.
Press SOURCE until AUX appears in the dis-
play.
# If the auxiliary setting is not turned on, AUX
cannot be selected. For more details, see Switch-
ing the auxiliary setting on page 46.

Setting the AUX title

The title displayed for the AUX source can be
changed.
1 After you have selected AUX as the
source, press FUNCTION and hold until
TITLE IN appears in the display.
2 Press a or b to select a letter of the al-
phabet.
Each press of a will display a letter of the al-
phabet in A B C ... X Y Z, numbers and sym-
bols in 1 2 3 ... > [ ] order. Each press of b will
display a letter in the reverse order, such as Z
Y X ... C B A order.
3 Press d to move the cursor to the next
character position.
When the letter you want is displayed, press d
to move the cursor to the next position and
48
En
All manuals and user guides at all-guides.com
then select the next letter. Press c to move
backwards in the display.
4 Move the cursor to the last position by
pressing d after entering the title.
When you press d one more time, the entered
title is stored in memory.
5 Press BAND to return to the playback
display.

Setting the level indicator

These are two stored level indicator to select
from.
% Press EQ and hold to select the level in-
dicator.
Press EQ and hold repeatedly to switch be-
tween the following settings:
Level indicator 1Level indicator 2Level in-
dicator fullLevel indicator off