Other Functions; Using The Aux Source; Selecting Aux As The Source; Setting The Aux Title - Pioneer DEH-P4400R Manual Del Usuario

Other Functions

Using the AUX source

An IP-BUS-RCA Interconnector such as the
CD-RB20 or CD-RB10 (sold separately) lets you
connect this unit to auxiliary equipment featur-
ing RCA output. For more details, refer to the
IP-BUS-RCA Interconnector owner's manual.

Selecting AUX as the source

Press to select
SOURCE
Press until
SOURCE AUX
• If the auxiliary setting is not switched on,
cannot be selected. For more details, see
Switching the auxiliary setting on page 37.

Setting the AUX title

The title displayed for the
changed.
1 After you have selected
press and hold until
FUNCTION
appears in the display.
2 Press 5 or ∞ to select a letter of the alpha-
bet.
Each press of 5 will display a letter of the alpha-
bet in , numbers and symbols in
A B C ... X Y Z
order. Each press of ∞ will display a
3 ... @ # <
letter in the reverse order, such as
order.
3 Press 3 to move the cursor to the next
character position.
When the letter you want is displayed, press 3
to move the cursor to the next position and then
select the next letter. Press 2 to move back-
wards in the display.
as the source.
AUX
appears in the display.
AUX
source can be
AUX
as the source,
AUX
TITLE IN
1 2
Z Y X ... C B A
4 Move the cursor to the last position by
pressing 3 after entering the title.
When you press 3 one more time, the entered
title is stored in memory.
5 Press to return to the playback
BAND/ESC
display.
Section
09
39
En