Output Connection - Sony XM-5ES Manual Del Usuario

 4 speaker + 1 subwoofer system
With "Input Connection" (page 12) , , , ,
 or .
Front speaker (min. 4 Ω)
Rear speaker (min. 4 Ω)
Subwoofer (min. 2 Ω)
 2 bridged speaker + 2 subwoofer
system
With "Input Connection" (page 12) .
Full range speaker (min. 2 Ω)
Subwoofer (min. 4 Ω)
 2 bridged speaker + 1 subwoofer
system
With "Input Connection" (page 12) .
Full range speaker (min. 2 Ω)
Subwoofer (min. 2 Ω)

Output Connection

Through the LINE OUT connector, this amplifier can
output signals to additional amplifiers. This allows a
flexible system connection that utilizes multiple
amplifiers.
Notes
• Audio signals output from LINE OUT connectors are not
affected by any signal processing, such as the HPF and LPF
settings.
• According to your needs, set the LINE OUT MODE switch
on the control panel (top panel) to "THRU", "STEREO" or
"ALL".
• Refer to the operating instructions supplied with your
additional amplifier for connection details.
Additional amplifier
15
GB