Specifications - Sony XM-5ES Manual Del Usuario

Specifications

FOR THE CUSTOMERS IN THE USA.
POUR LES CLIENTS AUX ÉTATS-UNIS.
AUDIO POWER SPECIFICATIONS
CTA2006 Standard
Power Output:
100 Watts RMS × 4 Channels at 4 Ohms,
450 Watts RMS × 1 Channel at 4 Ohms
and ≤ 1% THD+N;
165 Watts RMS × 4 Channels at 2 Ohms,
750 Watts RMS × 1 Channel at 2 Ohms
and ≤ 1% THD+N
Signal to Noise Ratio:
77 dBA (reference: 1 Watt into 4 Ohms)
Circuit system:
Class D Technology circuit
Pulse power supply
Inputs:
RCA pin jacks
Input level adjustment range:
0.2 V – 8 V (RCA pin jacks)
3 V – 16 V (high-level input)
Outputs:
Speaker terminals
RCA pin jacks
Speaker impedance:
2 Ω – 8 Ω (stereo)
4 Ω – 8 Ω (when used as a bridging amplifier)
Maximum output:
4 Speakers: 237.5 W × 4 (at 2 Ω) / Total 950 W
1 Woofer/Subwoofer: 950 W (at 2 Ω)
Rated output:
2 Speakers: 330 W × 2 (at 4 Ω)
4 Speakers: 165 W × 4 (at 2 Ω), 100 W × 4 (at 4 Ω)
1 Woofer/Subwoofer: 450 W × 1 (at 4 Ω)
1 Woofer/Subwoofer: 750 W × 1 (at 2 Ω)
Frequency response:
CH 1-4: 10 Hz – 40 kHz (
SUB CH: 10 Hz – 500 Hz (
THD (total harmonic distortion):
0.05% or less (at 1 kHz, 4 Ω)
Low-pass filter:
50 Hz – 500 Hz, 12 dB/oct
500 Hz – 5 kHz, 12 dB/oct
High-pass filter:
50 Hz – 500 Hz, 12 dB/oct
500 Hz – 5 kHz, 12 dB/oct
Subsonic filter:
5 Hz – 50 Hz, 24 dB/oct
Power requirements:
12 V DC car battery (negative ground (earth))
Power supply voltage:
10.5 V – 16 V
dB)
dB)
Current drain:
At rated output:
30 A (4 Ω, 100 W × 4)
80 A (2 Ω, 750 W × 1)
Remote input: 4 mA
Dimensions:
Approx. 380 mm × 60 mm × 215 mm (15 in ×
2
3 / in × 8 1 / in) (w/h/d)
8 2
 380 mm (15 in)
 330 mm (13 in)
 215 mm (8
1 / in)
2
 196 mm (7
3 / in)
4
 60 mm (2
3 / in)
8
Mass:
Approx. 4.3 kg (9 lb 8 oz) not incl. accessories
Package contents:
Main unit (1)
Bass remote (1)
Parts for installation and connection (1 set)
Design and specifications are subject to change
without notice.
17
GB