Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
7.-
: allows you to change the play and repeat mode of the player (repeat all, repeat folder, repeat 1 and
random play).
8.-
(FOLDER): A short press on this button starts/pauses playback. A long press displays the folder in
playback.
9.- MIC 2: microphone input 2, 6.3 mm jack plug.
10.- MIC 1: microphone input 1, XLR connector.
11.- MIC 1 VOL, MIC 2 VOL: volume controls for microphone inputs 1 and 2.
12.- 5-band graphic equaliser.
13.- LINE OUT: line level stereo output, 2 x RCA connectors.
14.- LINE IN: line level stereo auxiliary input, 2 x RCA connectors.
15.- Auxiliary input operation selector. Allows you to select between the LINE IN input and the player module.
16.- VOL: volume control of the line level input and USB/SD/MP3 player.
17.- POWER: portable amplifier power indicator light.
18.- PEAK: signal peak indicator light. It lights up when an input signal is detected with a level which is too high
or when there is an excessive output level that may cause a fault.
19.- MASTER: output volume control of the final mix of all inputs.
20.- ECHO: control for the adjustment of the number of repetitions of the echo effect of the microphone inputs.
21.- Independent telescopic antennas for channels A and B.
22.- REF A-B: adio frequency signal level indicator lights.
23.- CH A-B VOL: volume controls for the wireless microphones.
24.- ON/OFF: switch to activate/deactivate the wireless microphone receiver modules.
25.- Indicator light for the wireless microphone receiver modules.
26.- External power supply terminals 12 V DC.
27.- Charging indicator
process is complete.
28.- Battery charge level indicators.
29.- Power supply voltage selector 115/230 V.
30.- Input for AC power cord connection.
31.- General on/off switch of the loudspeaker.
HAND-HELD MICROPHONE
1.- Use two LR-6AA alkaline batteries.
2.- Operation switch. It has 3 positions, ON, STANDBY (central position) and OFF. Place it in the ON position
for operation. Place the switch in the position STANDBY to save battery power and the microphone will
turn on immediately when switching to ON.
3.- Battery indicator light. It will turn green when the charge level is correct and red when the batteries are
low.
1
lights. Illuminates Turns red during
1
3
4 5 6
2
battery charging and green when the charging
2 3
- 3 -
EN
Publicidad
Tabla de contenido
