Preparation For Operation; Positioning Of The Unit; Working With The Unit - MSW Motor Technics MSW-TCT-02 Manual De Instrucciones

1. Separator lever handle
2. Tire separator lever
3. Separator
4. Rim protectors
5. Base
3.2.

Preparation for operation

POSITIONING OF THE UNIT

Operate the unit on a level, stable, clean and dry surface and out of the reach of
children and persons of impaired mental, sensory and intellectual functions.
ASSEMBLY OF THE UNIT
The delivered device does not require any assembly - it is ready to work.
3.3.

Working with the unit

A. Place the tool on a stable, flat, paved surface.
B. Let the air out of the wheel completely.
C. Lay the wheel horizontally on the base under the separator.
D. Pulling the lever handle, bring the separator closer to the side of the tire,
so that its edge is in contact with the tire near the rim edge (see picture
below). Press the tire separator at this point until it peels away from the
rim with a characteristic knocking sound.