Completing The Installation - Dacor DHDU990C/DA Serie Instrucciones Para Instalación

Installation

Completing the installation

1. Place the drip tray bracket over the hood back filter
support and place 2 drip tray screws on the slots.
A. Drip trays
B. Drip tray bracket
C. Drip tray screws
Single motor assembly
Double motor assembly
A
B
A
B
2. Grasp the filter handles with both hands and then
place the front edge of the filter into the hood.
3. Push up on the back of the handle, and then set rear
of filter into the drip tray to secure. Repeat for each
filter.
2
Model shown for reference only, features may vary
Place the filters and check the operation of the hood.
• To get the most efficient use from your new hood,
read the "Use and Care" manual.
• Keep these Installation Instructions and Use and Care
Guide close to hood for easy reference.
1
ENGLISH 19