Use Procedure - Schulz FSB 16 TORK Manual De Instrucciones

10. USE PROCEDURE

1. Adjust the rotation of the spindle 1 nearest to the one selected:
1.1 Ensure that the drill is turned off.
• Position the belt(s) 5 correctly. Guide yourself via Figure 9.3, or by the tag fixed in the head.
• Stretch the belt(s) and close the protector.
2. Adjust the depth of the drilling via the adjustment screw 7.
3. With the help of the fixation support lever of table 8 position respectively the table 9 and the safety ring 10
at the required height. For drilling at an angle, adjust the table via the screw 11. Adjust it to the ideal angle
by using a protractor.
4. Position or fix the part to be drilled on the table, or if necessary, on base 12, using a suitable device for
it.
5. To cool the bit use the lubricant in accordance with the material to be drilled.
6. Activate the start switch.
7. Spindle is moved forward via the lever 14. In order to return it, just let go of the lever.
Note: careful that the lever does not reach the operator.
FIGURA 9.2
All manuals and user guides at all-guides.com
FIGURA 9.3
42
fixing