DJI LiDAR Guia Del Usuario página 7

11. Heat Dissipation Slot
DO NOT obstruct the slot during use.
Used with DJI RS 3 Pro
1. Attach the LiDAR Range Finder to the hot shoe of the camera and tighten the lock
knob. (Figure A)
2. Connect the power and communication port of the LiDAR Range Finder to the
video transmission/LiDAR Range Finder port of DJI RS 3 Pro using the multi-
camera control cable provided. (Figure B)
3. The LiDAR Range Finder is powered by DJI RS 3 Pro and turns on after the gimbal
has power. The visible light camera view (not the view of the attached camera)
displays on the touchscreen of the gimbal.
The 1/4"-20 thread to cold shoe adapter can be detached. The user can
also attach the LiDAR Range Finder to a camera cage via the 1/4"-20
screw.
If the camera view on the touchscreen is blurred, use the LiDAR Range
Finder control cable instead of the multi-camera control cable to obtain a
clear camera view. Note: the end with the shorter part of the cable should be
connected to the power and communication port of the LiDAR Range Finder,
the longer part of the cable should be connected to the video transmission/
LiDAR Range Finder port of DJI RS 3 Pro.
LiDAR Settings
Lens Profile
Tap Lens Profile to calibrate the lens, autofocus can be used after calibration.
During camera lens calibration, it is recommended to shoot as few
subjects as possible. The subject should be a person or flat surface with
discernible features (such as a picture on the wall). The accuracy of the
lens calibration will affect the autofocus performance.
The lens parameters will be stored in the focus motor after calibration.
Only focus motor calibration is required after choosing the lens profile.
There is no need to calibrate the lens again.
Steps:
1. Set the function of the front dial for the gimbal to Focus Motor. Power on DJI RS 3
Pro, swipe up from the bottom of the touchscreen, and tap Dial Function. Scroll to
select Focus Motor.
2. Tap < and swipe down from the top of the touchscreen to return to the homepage.
6
Joystick
Joystick
Speed
Smoothness
Med Med
Dial
Dial Speed
Function
50
Dial Functions
Focus Motor
Focus/Zoom
ISO
Aperture
Shutter
Roll
Rotation Rotation