HSM ProfiPack P425 Instrucciones De Servicio página 11

6 Operation
Switching the system on
• Unlock the emergency stop button
by turning it anti-clockwise.
• Move the power switch at the right-
hand side to position "I".
 "Ready for operation" display fl ashes.
The "Ready for operation" display illumi-
nates constantly after a short period of time.
The machine is ready to operate.
Press the "Forward button".
The cutting unit starts up.
The operating speed can be controlled in
4 levels using the - and + adjustment buttons.
Changing the settings during operation is
possible.
Adjustable limit stop
Lever up: For moving
Lever down: Limit stop fi xed
07/2021
Feed in cardboard
• Cardboard is processed at a width of up to
425 mm.
• Wider cardboard is automatically trimmed.
• The cutting unit is switched off using
the stop button.
Switch off
Switch the mains switch on the right side to
position "0".
Profi Pack P425
english
425 mm
11