Tabla de contenido
Publicidad
Wire solar panels in series
(refer to the figure below)
1. Snap the male connector of one solar panel into the female
connector of the other respectively to wire the three solar panels
in series.
2. Wire the two connectors that are unwired in step 1 with the Solar
Charging Cable (MC4 to XT60 cable) respectively.
3. Connect the XT60 connector on the Solar Charging Cable (MC4
to XT60 cable) to the XT60 port on the portable power station
to recharge the unit.
*For more information and methods about solar charging,please refer to the user manual of the specific portable power station.
2
1
3
1
2
Publicidad
Tabla de contenido
