Operations - Skil BB9504-00 Manual Del Propietário

OPERATIONS

ON/OFF switch (Fig. 13)
1. To turn the sander ON, move the switch to
the up (ON) position.
2. To turn the sander OFF, move the switch to
the down (OFF) position.
3. To lock the switch in the OFF position:
a. Wait until the sander comes to a complete
stop.
b. Remove the safety key from the switch
housing. Store the safety key in a safe
place.
4. To unlock the switch and turn the sander
ON, insert the safety key into the switch, and
move the switch to the ON position.
Bevel sanding (Fig. 14)
1. The work table can be tilted from 0° to 45°
for bevel sanding.
2. Loosen the table locking knob and tilt the
work table to the desired angle.
3. Retighten the table locking knob.
WARNING
between the table and sanding surface, the
table should be repositioned on the table
support to retain a maximum of 1/16"
(1.6 mm) distance between sanding surface
and table.
22
To avoid trapping the
workpiece or fingers
Fig. 13
Safety key
ON/OFF switch
Fig. 14
Table locking knob
0°-45°