Power Saving Function - Sony CPD-17F03T Manual De Instrucciones

Horizontal size
The adjustment data becomes the unique setting for the
input signal received.
1
Press the Å+/– button.
The Å OSD (On Screen Display) appears.
2
Press the Å+/– buttons.
+ ...to enlarge
– ...to diminish
Vertical size
The adjustment data becomes the unique setting for the
input signal received.
1
Press the +/– button.
The OSD (On Screen Display) appears.
2
Press the +/– button.
+ ...to enlarge
– ...to diminish
Pincushion
The adjustment data becomes the unique setting for the
input signal received.
1
Press the d+/– button.
The d OSD (On Screen Display) appears.
2
Press the d+/– button.
+ ...to expand the picture sides
– ...to diminish the picuture sides
50
RESET
50
50
Rotation
The adjustment data becomes the common setting for all
input signals.
1
Press the +/– button.
The OSD (On Screen Display) appears.
2
Press the +/– button.
+ .... to rotate clockwise
– .... to rotate counterclockwise
Resetting
• Press the RESET button to recall the
factory settings for brightness, contrast,
pincushions, horizontal and vertical
size, and center for the mode currently
in use.
• Press and hold the RESET button for 2
seconds to recall factory settings for all
adjustments in all modes.
Power Saving
Function
This monitor meets the power-saving guidelines set by the
EPA Energy Star program as well as the more stringent
NUTEK 803299 (TCO92) guidelines. It is capable of reduced
power consumption when used with a computer equipped
with Display Power Management Signaling (DPMS). By
sensing the absence of the sync signal coming from the
computer, it will reduce the power consumption as follows:
CAUTION: The Power Saving function will automatically
put the monitor into Active-off state if the power
switch is turned on without any video signal
input. Once the horizontal and vertical syncs are
sensed, the monitor will automatically return to
its Normal operation state.
Power
State
consumption
Normal
1 100%
operation
Suspend
2 (1st step of approx. 10%
power saving)
Active-off
3 (2nd step of approx. 7%
power saving)
50
Required POWER
u Power
resumption SAVING
indicator
time indicator
— green on off
approx. 3
green on orange on
sec.
approx. 10
off orange on
sec.
5
EN