Safety information
It is advisable to wait at least four hours before
connecting the appliance to allow the oil to flow back
to the compressor.
The appliance's surroundings will need to have
suitable air circulation, otherwise overheating may
occur. For sufficient ventilation, follow the installation
instructions.
Wherever possible the spacers of the product should
be positioned against a wall to prevent touching or
grabbing warm parts (compressor, condenser) and
possible burns.
The appliance must not be located close to radiators
or cookers.
Make sure that the mains plug is accessible after the
installation of the appliance.
Service
Any electrical work required to service the appliance
should be carried out by a qualified electrician or
competent person.
This product must be serviced by an authorised
Service Centre, and only genuine spare parts must
be used.
Energy saving
Don't put hot food in the appliance.
Don't place packed food items close together as this
prevents air from circulating.
Make sure food items don't touch the back of the
compartment(s).
7