LUCCI Air Airfusion BALI Instrucciones De Instalación página 6

Airfusion BALI Installation Instructions
Fig. 8.5
Fig. 8.6
6. Insert the decorative cover (7) onto the down rod (6) to cover the down rod coupling housing (8).(Fig. 8.5)
7. Insert the canopy (5) over the down rod (6) and install the ball joint (2) and dowel pin (3) back onto the
down rod (6) and secure by tightening the set screws (4). (Fig. 8.5 and Fig. 8.6)
INSTALLATION OF BLADE (Fig. 9)
1. Assemble the fan blades to the fan blade bracket by tightening the 4 blade screws and washers. Take
note the correct side of the blades with the marking "THIS SIDE UP" is on the screw head side. (Fig. 9.1).
2. Install the fan blade assembly to the fan assembly by the 2 screws and spring washer set. (Fig. 9.2)
3. Repeat the same process for the other blades.
Ensure all screws are tightened evenly to reduce the chance of warping or unbalancing. Take care not to over
tighten the screws, as this can damage the blades.
THIS SIDE UP
Fig. 9.1
5 | P a g e