Michele RONDA 703 Manual De Instrucciones página 8

Split Time
1. Press B while the chronograph is running.
2. Press B again to return to the chronograph.
3. Press A to finalize timing.
4. Press B to reset.
Chronograph Zero Reset
1. If either of the chronograph hands is not at the zero (12:00) position, pull crown out
to position 2.
2. Press B to reset chronograph minute hand. Each press of B will advance the
chronograph minute hand by one increment, or press and hold B for fast advance.
3. Press A to reset chronograph 1/5 second hand. Each press of A will advance
the chronograph 1/5 second hand by one increment, or press and hold A for
fast advance.
4. Return crown to position 1.
14
CHRONOGRAPH MODELS (ISA 8172/220)
Hour Hand
Second
Hand
Date
Display 1
Setting the Time
1. Pull crown out to position III (the watch stops).
2. Turn crown until you reach correct time.
3. Push crown back into position I.
PLEASE NOTE: The day of the week changes with each 24 hour rotation.
Setting the Date
1. Pull crown out to position II (the watch continues to run).
2. Turn crown until correct date appears.
3. Push crown back into position I.
PLEASE NOTE: Do not set the date between 9:00 p.m. and 12:30 a.m.
Pusher A
I II III
Crown
(Position I, II, III)
Minute Hand
Pusher B
Indicator
Display 2
15