Installation Information - DURAVIT 1930 Serie Instrucciones De Montaje

Important information
About these instructions
The installation instructions come as part of the Duravit
product and must be read carefully prior to installation.
Target readership and qualifications
This is a professional grade product. A working knowledge
of construction techniques and code compliant plumbing
installation are required for proper installation and user
satisfaction. The product must be installed by a licensed
plumber.
Explanation of the key words and symbols
WARNING
NOTICE
Link to installation information in this section
Link to other instructions
Inspection (e.g. for scratches)
Inspect for leaks and that all connections have a
watertight seal
Delivery contents
+
Accessories (not included)
> Action required
Safety instructions
Risk of personal injury or breakage through fragile
product!
> 2 people are recommended of handling.
> Handle with care.
4
MAL_57311/19.01.1
Indicates a hazardous
situation which, if not
avoided, could result in
death or serious injury.
Is used to address
practices not related to
physical injury.
Product and / or property damage
The breach of local and country-specific regulations and
standards can cause damage to the product and / or
property damage.
> Observe the local installation regulations and any
country-specific standards at all times.
Prior to the installation
Please read specification sheets prior to the installation.
Specification sheets are available for download at
pro.duravit.us.
Water installation
HET (high
efficiency toilet)
Single flush 1.28 gpf / 4.8 lpf
Dual flush 1.32/0.92 gpf /
5.0/3.5 lpf

Installation information

> For more details scan QR Code on packaging label.
1
Inspection (Diagram 1)
> Inspect product for any potential damage that may
have occurred during transport.
> Do not install if any damage is visible.
11
Risk of external leaks! (Diagram 11)
NOTICE
Risk of external leaks!
> Do not lift or rock the toilet after placement.
> If you break the watertight seal, you must install a
new wax seal.
12
Risk of product damage! (Diagram 12)
NOTICE
Risk of product damage!
> Overtightening may cause breakage or chipping of
vitreous china.
> Handle with care.
Operation pressure
Recommended:
25 – 80 psi /
172 – 550 kPA
20 – 80 psi /
140 – 550 kPA