Charging Other Usb Devices - Tronic TKHQ 10 A1 Instrucciones De Uso

Ocultar thumbs Ver también para TKHQ 10 A1:
Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 184
Lift the mobile phone to remove it from the car cradle. The holding
clamps 6 automatically move outwards.
When charging is complete, disconnect the car/USB adapter 0 from
the 12/24 V vehicle socket (cigarette lighter).
CAUTION
In vehicles in which the cigarette lighter also works with the ignition
switched off, the device must be disconnected from the cigarette lighter
after use. Otherwise, the vehicle battery may be discharged over a
long period of time, since the device also uses power when it is idle.

Charging other USB devices

CAUTION
If you use both USB sockets 7/9 to charge 2 devices at the same time,
the total current consumption may not exceed 5.4 A (= 5400 mA).
Otherwise, the car/USB adapter 0 could overload and be damaged.
You can also charge other devices that require a 5 V charging voltage
from the USB socket 7 on the car/USB adapter 0 or devices that
require a 5 V, 9 V or 12 V charging voltage from the USB socket 9.
To do this, connect the charging cable of your device to one of the USB
sockets on the car/USB adapter 0.
TKHQ 10 A1
GB │ IE 
 15

Publicidad

Tabla de contenido
loading

Tabla de contenido