Light Effects; Aux In/Line In - Medion LIFE P61800 Manual De Instrucciones

7.4. Light eff ects
 Press the LIGHT button repeatedly to activate a preset light effect for the
speaker LEDs.
The following settings are already saved:
Display
L-1
L-2
L-3
L-4
OFF
From a certain volume, the speaker LEDs flash in time with the music.
Three modes are available for the LED light around the speaker:
 Press and hold the LIGHT button repeatedly to select a preset flash mode (E-1,
E-2, E-3).
In all three modes, the lighting around the KEY, FUNCTION/
and the VOLUME controller is switched on at the same time.
The top and bottom strobe light flashes in time to the music in all three
modes.
 To switch off the LED light around the speaker, the strobe light and the button
lighting, press and hold the LIGHT button repeatedly until EOFF is shown on the
display.

8. AUX IN/LINE IN

You can use the AUX IN and LINE IN connections to connect an external playback
device (for example a CD player or MP3 player).
 Switch off the party sound system.
 Switch off your external device.
 Plug one end of a 3.5 mm jack cable (not supplied with the device) into the AUX
IN socket on the top of the device or a stereo cinch cable (not supplied with the
device) into the LINE IN socket on the back of the device.
 Connect the other end of the cable to your external device.
 Switch on your external device.
 Switch on the party sound system.
 Press the FUNCTION/
(AUX/LINE).
The audio signal from your external device will now be played back.
Light effect
Speaker LEDs flash blue
Speaker LEDs flash red
Speaker LEDs flash green
Speaker LEDs flash in various colours
Light effect for speaker LEDs is not active
button repeatedly to select the required audio source
DE
EN
FR
NL
IT
ES
PL
buttons
49