Kit Includes; Tools Required - Swing-N-Slide PIONEER 150 Manual De Instrucciones

Summit Slide Instructions
Fits 48" (121,9 cm) Deck Height

KIT INCLUDES:

Not Included In Kit:
17" (43,1 cm)
Cut
1-3/4"
(4,4 cm)
1-3/4" (4,4 cm)

Tools Required:

Phillips Bit
1/8" & 1/4" Drill Bits
ASSEMBLY STEPS
1. Align slide sections together on the ground (Fig. 1). Begin
attaching two slide sections together by securing the bolts
in place fi nger tight (see Fig. 2 for proper Bolt Sequence).
Following this pattern install (1) bolt, (2) washers and (1)
lock-nut per hole (see Fig. 1).
Once all (11) bolts, (22) fl at washers and (11) lock-nuts
are in place go back and tighten all hardware with
appropriate tools.
IMPORTANT: Tighten securely so slide sections are
tight against each other AND there are a minimum of
one to two threads extending beyond each lock-nut.
4
10
11
2
Weight Limit: 250 lbs
For children 2-10 years of age
Specifications subject to change without notice.
Manufactured for: Backyard Play Systems • 166 Etowah Industrial Ct. • Canton, Georgia 30114• USA • 1-800-882-0272 • playsupport@backyardproducts.com
Made in USA • Printed in USA
Stake
2" x 4" x 17" (5,1 x 10,2 x 43,1 cm)
Use Pressure-Treated Wood
x1
Tape Measure
Electric Drill
8
9
7
Bolt Sequence
Fig. 2
WARNING: Assembly by adult.
AVERTISSEMENT: L'assemblage dolt être exécuté par un adulte.
ADVERTENCIA: El ensamblaje lo debe hacer un adulto.
WARNING: ASSEMBLY BY ADULT.
WARNING: ASSEMBLY BY ADULT
Hex Bolt
x11
Deck Screw
x2
1-1/4"
(3,2 cm)
Screw size should be a #8 thread size
minimum and coated for use
with treated wood.
Hammer
(11) 5/16" (7,8 mm) Lock-nut
6
3
5
1
1
NE 4700-Y, NE 4700-T,
FOR PRIVATE USE ONLY
DO NOT USE IN PUBLIC SETTNGS!
x22
1/2"
(12,7 mm)
Screw must be to sizes shown at a
minimum. Do not use a screw size
shorter than 1-1/4" (3,2 cm) long.
Circular Saw
(22) 5/16" (7,8 mm)
Flat Washers
(11) 5/16" x 1"
(7,8 mm x 19 mm)
Hex Head Bolt
Tighten lock-nut to a minimum of three threads past locknut.
NE 4701
x11
Truss Screw
x4
1/4"
1-1/4"
(6 mm)
(3,2 cm)
Socket Wrench set /
Wrenches
Fig. 1
LDR 1-22-2020 LA 8042