This manual
Information property
Copyright © 2017, CARLO GAVAZZI Controls SpA
All rights reserved in all countries.
CARLO GAVAZZI Controls SpA reserves the right to apply modifications or make improvements to the relative documentation
without the obligation of advance notice.
Safety messages
The following section describes the warnings related to user and device safety included in this document:
NOTICE: indicates obligations that if not observed may lead to damage to people.
NOTICE: indicates obligations that if not observed may lead to damage to the device.
CAUTION! Indicates a risky situation which, if not avoided, may cause data loss.
IMPORTANT: provides essential information on completing the task that should not be neglected.
General warnings
This manual is an integral part of the product and accompanies it for its entire working life. It should be consulted for all
situations tied to configuration, use and maintenance. For this reason, it should always be accessible to operators.
NOTICE: no one is authorized to open the analyzer. This operation is reserved exclusively for CARLO GAVAZZI technical
service personnel.
Protection may be impaired if the instrument is used in a manner not specified by the manufacturer.
Service and warranty
In the event of malfunction, fault, requests for information or to purchase accessory modules, contact the CARLO GAVAZZI
branch or distributor in your country.
Installation and use of analyzers other than those indicated in the provided instructions and removal of the MABC module void the
warranty.
Download
This manual
Installation instruction - WM50
Installation instruction - TCD12
Accessory module user manual
UCS desktop
UCS Mobile
Modbus communication protocol
www.productselection.net/MANUALS/UK/WM50_im_use.pdf
www.productselection.net/MANUALS/UK/WM50_im_inst.pdf
www.productselection.net/MANUALS/UK/TCD12_im.pdf
www.productselection.net/MANUALS/UK/WM40MODULES_im.pdf
www.productselection.net/Download/UK/ucs.zip
Google Play Store
www.productselection.net/Download
WM50 - Instruction manual | 26/04/2022 | CARLO GAVAZZI Controls SpA
1