Accessories; Troubleshooting - Ryobi YG200BN2 Manual Del Operador

To order parts and maintenance kits, call 1-800-525-2579.
 Overhaul Maintenance Kit ..........................................................................................................................079079022702
 Driver Maintenance Kit ...............................................................................................................................079079022701
WARNING:
Current attachments and accessories available for use with this tool are listed above. Do not use any attachments or
accessories not recommended by the manufacturer of this tool. The use of attachments or accessories not recommended
can result in serious personal injury.
PROBLEM
Air leak near the top of the tool or in the
trigger area
Air leak near the bottom of the tool
Tool does nothing or operates sluggishly Inadequate air supply
Tool jams frequently
NOTE: ILLUSTRATIONS START ON PAGE 12
AFTER FRENCH AND SPANISH LANGUAGE SECTIONS.

ACCESSORIES

TROUBLESHOOTING

POSSIBLE CAUSE
Inadequate lubrication
Loose screws
Worn or damaged O-rings or seals
Inadequate lubrication
Loose screws
Worn or damaged O-rings or bumper
Inadequate lubrication
Worn or damaged O-rings or bumper
Incorrect fasteners
Damaged fasteners
Loose magazine
Dirty magazine
Worn or damaged driver
11 - English
SOLUTION
Lubricate tool
Tighten screws
Install Overhaul Kit
Lubricate tool
Tighten screws
Install Overhaul Kit
Verify adequate air supply
Lubricate tool
Install Overhaul Kit
Verify that fasteners are the correct size
Replace fasteners
Tighten screws
Clean magazine
Install Driver Maintenance Kit